March Chemical Pumps for Salt Water

Seeking a pump for the liquid Salt Water, March Pumps has many choices!  From 1GPM to 200 GPM, March Pumps has many pumps for Salt Water for any application. 

For pumping Salt Water at ambient, any of March's centrifugal sealless magnetic drive pumps will be able to handle Salt Water.  Above ambient temperature, certain pumps will have different temperature limits for Salt Water, especially approaching 190F.

While any March Magnetic Drive Pump will handle Salt Water, the pumps below are some of March's most popular models for use with Salt Water:

March Pumpís 893-04 centrifugal sealless magnetic drive submersible DC brush type 12V pumps ideal for marine applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 2.7 GPM 11 LPM 2.7 GPM 11 LPM
Max Head 10.6 FT 3.3 M 10.6 FT 3.3 M
Power .006 HP .004 KW .006 HP .004 KW
Electrical 12V Range 0-14
Submersible Yes

Type Centrifugal Mag Drive
Inlet 3/8"FPT
Outlet 3/8"OD
Wet End Noryl (Front and Rear Housings), Nylon (Impeller), Carbon/Teflon (Thrust Washer), Buna N (O-Ring), 316 Stainless Steel (Shaft), Ceramic Magnet
Uses Pump must be used submerged
When submerged, the following is also in contact with the solution Epoxy, Delrin, Motor Leads
P/N 0893-0001-0400

Request Additional Product Info

March Pumpís 893-06 centrifugal sealless magnetic drive submersible DC brush type 24V pumps ideal for marine applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 2.7 GPM 11 LPM 2.7 GPM 11 LPM
Max Head 10.6 FT 3.3 M 10.6 FT 3.3 M
Power .006 HP .004 KW .006 HP .004 KW
Electrical 24V Range 0-26V
Submersible Yes

Type Centrifugal Mag Drive
Inlet 3/8"FPT
Outlet 3/8"OD
Wet End Noryl (Front and Rear Housings), Nylon (Impeller), Carbon/Teflon (Thrust Washer), Buna N (O-Ring), 316 Stainless Steel (Shaft), Ceramic Magnet
Uses Must be submerged
When submerged, the following is also in contact with the solution Epoxy, Delrin, Motor Leads
P/N 0893-0001-0600

Request Additional Product Info

March Pumpís 893-09 centrifugal sealless magnetic drive submersible DC brushless 12V pumps ideal for marine applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 2.7 GPM 11 LPM 2.7 GPM 11 LPM
Max Head 10.6 FT 3.3 M 10.6 FT 3.3 M
Power .006 HP .004 KW .006 HP .004 KW
Electrical 12V Range 7-14
The 893-09, when used with Ametek Motor, must be used submerged.

The 893-09, when used with Papst motor, can be used open air or submerged.
Submersible Yes

Type Centrifugal Mag Drive
Inlet 3/8"FPT
Outlet 3/8"OD
Wet End Noryl (Front and Rear Housings), Nylon (Impeller), Carbon/Teflon (Thrust Washer), Buna N (O-Ring), 316 Stainless Steel (Shaft), Ceramic Magnet
Uses Submersible
When submerged, the following is also in contact with the solution Epoxy, Delrin, Motor Leads
P/N 0893-0030-0200 (With EBM Papst Motor)
P/N 0893-0061-0200 (With Ametek Motor)

Request Additional Product Info

March Pumpís 893-10 centrifugal sealless magnetic drive submersible DC brushless 24V pumps ideal for marine applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 2.7 GPM 11 LPM 2.7 GPM 11 LPM
Max Head 10.6 FT 3.3 M 10.6 FT 3.3 M
Power .006 HP .004 KW .006 HP .004 KW
Electrical 24V Range 12-28V
Submersible Yes

Type Centrifugal Mag Drive
Inlet 3/8"FPT
Outlet 3/8"OD
Wet End Noryl (Front and Rear Housings), Nylon (Impeller), Carbon/Teflon (Thrust Washer), Buna N (O-Ring), 316 Stainless Steel (Shaft), Ceramic Magnet
Uses Submersible or Open Air
When submerged, the following is also in contact with the solution Epoxy, Delrin, Motor Leads
P/N 0893-0031-0200

Request Additional Product Info

March Pumpís 1A-MD-3/8 centrifugal sealless magnetic drive submersible pumps ideal for chemical applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 2.3 GPM 8.7 LPM 2 GPM 7.5 LPM
Max Head 4.6 FT 1.4 M 3.2 FT 1 M
Power .005 HP .003 KW .005 HP .003 KW
Electrical 115V 50/60HZ or 230V 50/60HZ
Submersible Yes

Type Centrifugal Mag Drive
Inlet 3/8"OD
Outlet 3/8"OD
Wet End Polypropylene (Front Housing, Rear Housing, Impeller), Buna N (O-Ring), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft)
Uses Submersible or Open Air
When submerged, the following is also in contact with the solution Epoxy, Noryl, SJT Cord
P/N 0115-0007-0100 (115V)
P/N 0115-0007-0600 (230V)

Request Additional Product Info

March Pumpís 1A-MD-1/2 centrifugal sealless magnetic drive submersible pumps ideal for chemical applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 3 GPM 11.3 LPM 2.3 GPM 9 LPM
Max Head 4.6 FT 1.4 M 3.3 FT 1 M
Power .005 HP .003 KW .005 HP .003 KW
Electrical 115V 50/60HZ or 230V 50/60HZ
Submersible Yes

Inlet 1/2"OD
Outlet 1/2"OD
Wet End Polypropylene (Front Housing, Rear Housing, Impeller), Buna N (O-Ring), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft)
Uses Submersible or Open Air
When submerged, the following is also in contact with the solution Epoxy, Noryl, SJT Cord
P/N 0115-0007-0200 (115V)
P/N 0115-0007-0700 (230V)

Request Additional Product Info

March Pumpís 1A-MD-1/2 centrifugal sealless magnetic drive submersible pumps ideal for chemical applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 3 GPM 11.3 LPM 2.3 GPM 9 LPM
Max Head 4.6 FT 1.4 M 3.3 FT 1 M
Power .005 HP .003 KW .005 HP .003 KW
Electrical 115V 50/60HZ or 230V 50/60HZ
Submersible Yes

Inlet 1/2"OD
Outlet 1/2"OD
Wet End Polypropylene (Front Housing, Rear Housing, Impeller), Buna N (O-Ring), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft)
Uses Submersible or Open Air
When submerged, the following is also in contact with the solution Epoxy, Noryl, SJT Cord
P/N 0115-0007-0200 (115V)
P/N 0115-0007-0700 (230V)

Request Additional Product Info

March Pumpís 1C-MD centrifugal sealless magnetic drive submersible pumps ideal for chemical applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 3 GPM 11.3 LPM 2.4 GPM 9 LPM
Max Head 4.6 FT 1.4 M 3.3 FT 1 M
Power .005 HP .003 KW .005 HP .003 KW
Electrical 115V 50/60HZ or 230V 50/60HZ
Submersible Yes

Type Centrifugal Mag Drive
Inlet 1/4"MPT
Outlet 1/4"MPT
Wet End Polypropylene (Front Housing, Rear Housing, Impeller), Buna N (O-Ring), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft)
Uses Submersible or Open Air
When submerged, the following is also in contact with the solution Epoxy, Noryl, SJT Cord
P/N 0115-0007-0300 (115V)
P/N 0115-0007-0800 (230V)

Request Additional Product Info

March Pumpís 1U-MD centrifugal sealless magnetic drive submersible pumps ideal for chemical applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 3 GPM 11.4 LPM 2.4 GPM 9 LPM
Max Head 4.6 FT 1.4 M 3.3 FT 1 M
Power .005 HP .003 KW .005 HP .003 KW
Electrical 115V 50/60HZ or 230V 50/60HZ
Submersible Yes

Type Centrifugal Mag Drive
Inlet Screen
Outlet 1/4"MPT
Wet End Polypropylene (Rear Housing, Impeller), Buna N (O-Ring), Cycolac (Cover), Carbon/Teflon (Thrust Washer), Delrin (Screen), 316 Stainless Steel (Shaft),
Uses Submersible Only
When submerged, the following is also in contact with the solution Epoxy, Noryl, Cycolac, Delrin, SJT Cord
P/N 0115-0007-0400 (115V)
P/N 0115-0007-0900 (230V)

Request Additional Product Info

March Pumpís 2CP-MD centrifugal sealless magnetic drive submersible pumps ideal for marine applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 5 GPM 18.9 LPM 4.9 GPM 18.5 LPM
Max Head 13 FT 4 M 8.9 FT 2.7 M
Power .02 HP .015 KW .018 HP .014 KW
Electrical 115V 50/60HZ or 230V 50/60HZ
Submersible Yes

Type Centrifugal Mag Drive
Inlet 3/8"FPT & 3/4"MPT
Outlet 1/4"MPT
Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Stainless Steel (Shaft), Ceramic (Thrust Washer), Ceramic Magnet
Uses Submersible Only
When submerged, the following is also in contact with the solution Epoxy, Buna N, Cord
P/N 0125-0058-0100 (115V)
P/N 0125-0058-0200 (230V)

Request Additional Product Info

March Pumpís LC-2CP-MD centrifugal sealless magnetic drive submersible pumps ideal for marine applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 5 GPM 18.9 LPM 4.9 GPM 18.5 LPM
Max Head 13 FT 4 M 8.9 FT 2.7 M
Power .02 HP .015 KW .018 HP .014 KW
Electrical 115V 50/60HZ or 230V 50/60HZ
Submersible Yes

Type Centrifugal Mag Drive
Inlet 3/8"FPT & 3/4"MPT
Outlet 1/4"MPT
Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Stainless Steel (Shaft, Cooling Tube), Buna N (Grommet), Ceramic (Thrust Washer), Ceramic Magnet
Uses Submersible or Open Air
When submerged, the following is also in contact with the solution Epoxy, Buna N, Cord
P/N 0125-0057-0200 (115V)
P/N 0125-0057-0300 (230V)

Request Additional Product Info

March Pumpís LC-3CP-MD centrifugal sealless magnetic drive submersible pumps ideal for marine applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 8.5 GPM 32.2 LPM 8.2 GPM 31 LPM
Max Head 19 FT 5.8 M 14.1 FT 4.3 M
Power .05 HP .037 KW .05 HP .037 KW
Electrical 115V 50/60HZ or 230V 50/60HZ
Submersible Yes

Type Centrifugal Mag Drive
Inlet 3/4"FPT
Outlet 1/2"MPT
Wet End Polypropylene (Front and Rear Housing, Impeller), Cupric Nickel (Cooling Tube), Buna N (O-Ring, Cooling Tube Seal), Ceramic (Shaft, Thrust Washer), Ceramic Magnet
Uses Submersible or Open Air
When submerged, the following is also in contact with the solution Epoxy, Stainless Steel, Polysulfone, Cord
P/N 0130-0158-0200 (115V)
P/N 0130-0159-0200 (230V)

Request Additional Product Info

March Pumpís 5C-MD centrifugal sealless magnetic drive submersible pumps ideal for marine applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 14.5 GPM 54.9 LPM 14.5 GPM 54.8 LPM
Max Head 27 FT 8.2 M 19.6 FT 6 M
Power .125 HP .093 KW .125 HP .093 KW
Electrical 115V 50/60HZ or 230V 50/60HZ
Submersible Yes

Type Centrifugal Mag Drive
Inlet 1"FPT
Outlet 1/2"MPT
Wet End Polypropylene (Front and Rear Housing, Impeller), Buna N (O-Ring), Ceramic (Shaft, Thrust Washers), Ceramic Magnet
Uses Submersible only
When submerged, the following is also in contact with the solution Epoxy, Stainless Steel, Noryl, Cord
P/N 0150-0004-0200 (115V)
P/N 0150-0004-0400 (230V)

Request Additional Product Info

March Pumpís LC-5C-MD centrifugal sealless magnetic drive submersible pumps ideal for marine applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 14.5 GPM 54.9 LPM 14.5 GPM 54.8 LPM
Max Head 27 FT 8.2 M 19.6 FT 6 M
Power .125 HP .093 KW .125 HP .093 KW
Electrical 115V 50/60HZ or 230V 50/60HZ
Submersible Yes

Type Centrifugal Mag Drive
Inlet 1"FPT
Outlet 1/2"MPT
Wet End Polypropylene (Front and Rear Housing, Impeller), Buna N (O-Ring), 316 Stainless Steel (Shaft, Cooling Tube), Ceramic (Shaft, Thrust Washers), Ceramic Magnet
Uses Submersible or Open Air
When submerged, the following is also in contact with the solution Epoxy, Noryl, Cord
P/N 0150-0004-0500 (115V)
P/N 0150-0004-0600 (230V)

Request Additional Product Info

It is highly recommended, regardless of the temperature or concentration, that you contact a local distributor or March Manufacturing direct to review your application before ordering a pump.     

Listing of March Pump Salt Water Distributors

Chemical Pumps for Salt Water 

Salt water, chemically written as NaCl, is one of the most well-known chemical compounds. Salt water has endless applications from medical uses to preservation applications and more. Salt water has such diverse applications and is used in truly endless industries. As such, there are many chemical pumps from March Pump that can be used to pump salt water.  

March Pump offers endless options for chemical pumps used to pump salt water. Those pumps can range from the 893-04 to the 893-06 and the LC-5C-MD models in addition to many, many more. Many of these models are built to be submerged but can also work in open-air settings.  

Every situation requiring a chemical pump is unique, situations involving salt water included. There is no one pump that can accommodate just any situation. When it comes to chemical pumps, March Pump can help clients find exactly what they need.  

Disclaimer: These are only some of the pumps that can handle these chemicals.  

Warranty 

March Manufacturing Inc. Warranty and Warranty Registration

Search Our Pumps Distributor Map