March Chemical Pumps for Sodium Cyanide
Seeking a pump for the chemical Sodium Cyanide, March Pumps has many choices! From 1 GPM to 200 GPM, March Pumps has a pump for Acetic Acid for any application.
If pumping the chemical Sodium Cyanide at room temperature, it is recommended to go with a centrifugal sealless magnetic drive chemical pump made up of Polypropylene or Kynar Plastic.
The chemical Sodium Cyanide can also be heavy depending on the concentration and temperature. If the specific gravity is more than 1.1, a trimmed impeller is absolutely necessary to prevent decoupling or overloading the motor.
The following chemical pumps are a good place to start looking at when pumping the chemical Sodium Cyanide:
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 5 GPM | 18.5 LPM |
| Max Head | 13 FT | 2.7 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 10 GPM | 33 LPM |
| Max Head | 20.5 FT | 4.5 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 14 GPM | 50 LPM |
| Max Head | 21.5 FT | 4.7 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 17 GPM | 60 LPM |
| Max Head | 27 FT | 6 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 30 GPM | 102 LPM |
| Max Head | 41 FT | 9 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 38 GPM | 113.5 LPM |
| Max Head | 49 FT | 11 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 53 GPM | 180 LPM |
| Max Head | 60 FT | 12.3 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 82 GPM | 268 LPM |
| Max Head | 85 FT | 18 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 120 GPM | 400 LPM |
| Max Head | 95 FT | 20 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 200 GPM | 654 LPM |
| Max Head | 160 FT | 34.1 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 3.3 GPM | 11.3 LPM |
| Max Head | 40 FT | 8.8 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 12 GPM | 37.8 LPM |
| Max Head | 68 FT | 14.6 M |
Higher concentrations and higher temperatures of the chemical Sodium Cyanide together or by themselves, may make the pumps listed above unsuitable. It is highly recommended, regardless of the temperature or concentration, that you contact a local distributor or March Manufacturing direct to review your application before ordering a pump.
Listing of March Pump Sodium Cyanide Distributors
Chemical Pumps for Sodium Cyanide
Sodium Cyanide, chemically written as NaCN, is a toxic chemical that is beneficial to a wide-range of industries such as the development of pesticides. Sodium cyanide is also commonly used in mining.
Sodium cyanide, is extremely toxic and has a high boiling point, it requires a very specific chemical pump. Suggestions of pumps for sodium cyanide from March Pump include, but are not limited to the AC-2CP-MD and the TE-5.5C-MD, among many others. Many of the models from March Pump for designed to handle sodium cyanide use a Polypropylene housing and impeller and are potentially available with an explosion proof motor.
March Pump has a committed team of experts who understand the complexities of the chemicals that clients are pumping. As such, the March Pump team works hard to help clients find the perfect pump for the chemical or chemicals that they are working with all the while resolving the businesses and industrial challenges that they face in conjunction with their pumping tasks.
Disclaimer: These are only some of the pumps that can handle these chemicals.