Etching Equipment Applications for Our Pumps
Mag drive pumps are essential in etching equipment, removing engraving chips and discharge in the etching process. Pumps like these keep your shop cleaner and increase your efficiency.
March magnetic drive pumps are ideal for waste removal and chemical recirculation. A common pump for this application is a TE-5C-MD, which is capable of generating a maximum flow of 17 gallons per minute, they have a maximum head of 29 feet, and an internal pressure of 50psi. Our pumps are capable of handling highly corrosive chemicals and solvents.
Our products are the best option for your engraving operations. You can learn more about our etching equipment pumps below:
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 18 GPM | 60.5 LPM |
| Max Head | 29 FT | 6.3 M |
Electrical/Air: 1Ph 115/230V 60Hz, 1Ph 110/220V 50Hz, or 3Ph 230/460V 50/60Hz
Inlet: 1"FPT
Outlet: 1/2"MPT
Material: Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 10 GPM | 33 LPM |
| Max Head | 20.5 FT | 4.5 M |
Electrical/Air: 115V 50/60Hz or 230V 50/60Hz
Inlet: 3/4"FPT
Outlet: 1/2"MPT
Material: Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washer)