March Chemical Pumps for Hydrofluoric Acid
Seeking a pump for the chemical Hydrofluoric Acid, March Pumps has many choices! From 1 GPM to 82 GPM, March Pumps has a pump for Hydrofluoric Acid for any application.
If pumping the chemical Hydrofluoric Acid at room temperature, it is recommended to go with a centrifugal sealless magnetic drive chemical pump made up of Kynar Plastic, Encapsulated Impeller, and Carbon Bushing. Special care should be taken concerning the Ceramic Shaft and Thrust Washers, call March with the concentration to determine if the Ceramic should be replaced.
The chemical Hydrofluoric Acid can also be heavy depending on the concentration and temperature. If the specific gravity is more than 1.1, a trimmed impeller is absolutely necessary to prevent decoupling or overloading the motor.
The following chemical pumps are a good place to start looking at when pumping the chemical Hydrofluoric Acid:
|Max Flow||18 GPM||60.5 LPM|
|Max Head||29 FT||6.3 M|
|Max Flow||82 GPM||268 LPM|
|Max Head||85 FT||18 M|
Higher concentrations and higher temperatures of the chemical Hydrofluoric Acid, together or by themselves, may make the pumps listed above unsuitable. It is highly recommended, regardless of the temperature or concentration, that you contact a local distributor or March Manufacturing direct to review your application before ordering a pump.
Listing of March Pump Hydrofluoric Acid Distributors
Chemical Pumps for Hydrofluoric Acid
Hydrofluoric acid, chemically written as HF, is used in a wide range of industries, including the development of industrial materials and in etching and cleaning processes. Hydrofluoric acid, like many chemical compounds, can have adverse effects amidst all of its industrial benefits and uses. Hydrofluoric acid needs to be handled appropriately, especially when it comes to accommodating with a chemical pump.
March Pump is happy to offer a wide-range of chemical pumps for Hydrofluoric acid that include the TE-5NK-MD Magnetic Drive Pump which uses Natural Kynar in its build and operates a maximum flow of 18 gallons per minute with a maximum head of 29 feet. March Pumps’ offerings for hydrofluoric acid do not stop there, however, and include the TE-7.5K-MD Magnetic Drive Pump with a maximum flow of 82 gallons per minute and the TE-5.5NK-MD 1&3 Phase Magnetic Drive Pump with a maximum flow of 30 gallons per minute. These pumps are recommended by March’s experts, who have long-standing experience advising clients on chemical pump decisions for their business and industrial challenges.
The team at March Manufacturing always advises clients to review pump decisions with them prior to placing an order to ensure that clients have selected the absolute best pump for their chemical pumping needs.
Disclaimer: These are only some of the pumps that can handle these chemicals.