March Chemical Pumps for Fluosilicic Acid
Seeking a pump for the chemical Fluosilicic Acid, March Pumps has many choices! From 5 GPM to 200 GPM, March Pumps has a pump for Fluosilicic Acid for any application.
If pumping the chemical Fluosilicic Acid at room temperature, it is recommended to go with a centrifugal sealless magnetic drive chemical pump made up of Polypropylene or Ryton Plastic, Buna N or Viton O-Ring, Encapsulated Impeller, and Carbon or Ryton/Teflon/Carbon Combination Bushing.
The chemical Fluosilicic Acid can also be heavy depending on the concentration and temperature. If the specific gravity is more than 1.1, a trimmed impeller is absolutely necessary to prevent decoupling or overloading the motor.
The following chemical pumps are a good place to start looking at when pumping the chemical Fluosilicic Acid:
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 5 GPM | 18.5 LPM |
| Max Head | 13 FT | 2.7 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 10 GPM | 33 LPM |
| Max Head | 20.5 FT | 4.5 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 14 GPM | 50 LPM |
| Max Head | 21.5 FT | 4.7 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 18 GPM | 60.5 LPM |
| Max Head | 29 FT | 6.3 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 30 GPM | 102 LPM |
| Max Head | 41 FT | 9 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 38 GPM | 113.5 LPM |
| Max Head | 49 FT | 11 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 53 GPM | 180 LPM |
| Max Head | 60 FT | 12.3 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 82 GPM | 268 LPM |
| Max Head | 85 FT | 18 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 120 GPM | 400 LPM |
| Max Head | 95 FT | 20 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 3.3 GPM | 11.3 LPM |
| Max Head | 40 FT | 8.8 M |
Higher concentrations and higher temperatures of the chemical Fluosilicic Acid, together or by themselves, may make the pumps listed above unsuitable. It is highly recommended, regardless of the temperature or concentration, that you contact a local distributor or March Manufacturing direct to review your application before ordering a pump.
Listing of March Pump Fluosilicic Acid Distributors
Chemical Pumps for Fluosilicic Acid
Fluosilicic Acid, chemically written as F6H2Si, is a liquid chemical that is corrosive and requires the right pump to accommodate it. It has a strong smell and is commonly found in fertilizers, and it is also often added to water, as fluosilicic acid is present within a wide-range of industries.
Pumping fluosilicic acid requires the right chemical pump. Some great examples of chemical pumps available for pumping fluosilicic acid include the BC-3CP-MD Magnetic Drive Pump with a maximum flow of 10 gallons per minute at a maximum head of 20.5 feet. The BC-4C-MD Magnetically Coupled Pump is another great option, with a maximum flow of 14 gallons per minute with a maximum head of 21.5 feet. Other options include the TE-5C-MD 1PH Magnetic Drive Pump and more from March Pump.
Clients can browse the magnetic drive and magnetically coupled pumps best-suited to processing fluosilicic acid on March Pumps’ site but should use March Pumps’ experts to find the right pump for their specific chemical pumping needs.
Disclaimer: These are only some of the pumps that can handle these chemicals.