March Pump Series 3 are centrifugal magnetic drive pumps which have a maximum flow of 10GPM and a maximum head of 20.5 feet. They are available in Polypropylene and Kynar materials. They are available with 3/4 inch inlets and 1/2 inch outlets. They use a 1/15 horsepower motor, and are available in 115V or 230V. Submersible models and Air Power motors are an additional option.
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 8.5 GPM | 31 LPM |
| Max Head | 19 FT | 4.3 M |
Electrical/Air: 115V 50/60Hz or 230V 50/60Hz
Inlet: 3/4"FPT
Outlet: 1/2"MPT
Material: Polypropylene (Front and Rear Housing, Impeller), Cupric Nickel (Cooling Tube), Buna N (O-Ring, Cooling Tube Seal), Ceramic (Shaft, Thrust Washer), Ceramic Magnet
Submersible: Yes
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 10 GPM | 33 LPM |
| Max Head | 20.5 FT | 4.5 M |
Electrical/Air: 115V 60Hz or 230V 50/60Hz
Inlet: 3/4"OD
Outlet: 1/2"OD
Material: Polypropylene (Front and Rear Housing, Impeller), Buna N (O-Ring), Ceramic (Shaft, Thrust Washer), Ceramic Magnet
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 10 GPM | 33 LPM |
| Max Head | 20.5 FT | 4.5 M |
Electrical/Air: 115V 60Hz or 230V 50/60Hz
Inlet: 3/4"FPT
Outlet: 1/2"MPT
Material: Polypropylene (Front and Rear Housing, Impeller), Buna N (O-Ring), Ceramic (Shaft, Thrust Washer), Ceramic Magnet
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 10 GPM | 33 LPM |
| Max Head | 20.5 FT | 4.5 M |
Electrical/Air: 115V 50/60Hz or 230V 50/60Hz
Inlet: 3/4"OD
Outlet: 3/4"OD
Material: Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washer)
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 10 GPM | 33 LPM |
| Max Head | 20.5 FT | 4.5 M |
Electrical/Air: 115V 50/60Hz or 230V 50/60Hz
Inlet: 3/4"FPT
Outlet: 1/2"MPT
Material: Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washer)
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 10 GPM | 33 LPM |
| Max Head | 20.5 FT | 4.5 M |
Electrical/Air: 115V 50/60Hz or 230V 50/60Hz
Inlet: 3/4"FPT
Outlet: 1/2"MPT
Material: Carbon Filled Kynar (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washer)
| System | US | Metric |
|---|---|---|
| Max Flow | 10.5 GPM | 39 LPM |
| Max Head | 42 FT | 12.8 M |
Electrical/Air: 29 PSI or 4CFM
Inlet: 3/4"OD
Outlet: 3/4"OD
Material: Polypropylene (Front and Rear Housing. Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washer)
| System | US | Metric |
|---|---|---|
| Max Flow | 10.5 GPM | 39 LPM |
| Max Head | 42 FT | 12.8 M |
Electrical/Air: 29 PSI and 4 CFM
Inlet: 3/4"FPT
Outlet: 1/2"MPT
Material: Polypropylene (Front and Rear Housing. Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washer)