Chemical Pumps for Hydrofluosilicic Acid
Seeking a pump for the chemical Hydrofluosilicic Acid, March Pumps has many choices! From 1 GPM to 200 GPM, March Pumps has a pump for Hydrofluosilicic Acid for any application. If pumping the chemical Hydrofluosilicic Acid at room temperature, it is recommended to go with a centrifugal sealless magnetic drive chemical pump made up of Polypropylene, Encapsulated Impeller, Carbon Bushing, and Viton O-Ring.
The following chemical pumps are a good place to start looking at when pumping the chemical Hydrofluosilicic Acid:
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 5 GPM | 18.5 LPM |
| Max Head | 13 FT | 2.7 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 10 GPM | 33 LPM |
| Max Head | 20.5 FT | 4.5 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 14 GPM | 50 LPM |
| Max Head | 21.5 FT | 4.7 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 18 GPM | 60.5 LPM |
| Max Head | 29 FT | 6.3 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 30 GPM | 102 LPM |
| Max Head | 41 FT | 9 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 38 GPM | 113.5 LPM |
| Max Head | 49 FT | 11 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 53 GPM | 180 LPM |
| Max Head | 60 FT | 12.3 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 82 GPM | 268 LPM |
| Max Head | 85 FT | 18 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 120 GPM | 400 LPM |
| Max Head | 95 FT | 20 M |
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 3.3 GPM | 11.3 LPM |
| Max Head | 40 FT | 8.8 M |
Choosing a Hydrofluorosilicic Acid Industrial Pump
Hydrofluorosilicic acid is a colorless liquid and inorganic compound that is rarely found undiluted. It has a pungent smell and a characteristic sour taste. Hydrofluorosilicic acid in its concentrated form is toxic and corrosive. It is mainly produced as a precursor to synthetic cryolite and aluminum trifluoride. It is also commonly used in water treatment to maintain the fluoride level in water.
Higher concentrations and higher temperatures of the chemical Hydrofluosilicic Acid together or by themselves, may make the pumps listed above unsuitable. It is highly recommended, regardless of the temperature or concentration, that you contact a local distributor or March Manufacturing direct to review your application before ordering a pump.
Listing of March Pump Hydrofluosilicic Acid Distributors
Chemical Pumps for Hydrofluosilicic Acid
Hydrofluosilicic acid, chemically written as F6H2Si, is a complex chemical compound known for its strong scent and lack of color. Hydrofluosilicic acid is synonymous for fluosilicic acid, and it is a compound that is used in many applications that play a role in our daily lives. Like fluosilicic acid, it is used to develop fluoride in addition to in the development of myriad industrial materials and some cleaning products.
Because of hydrofluosilicic acid’s multitude of applications and the wide range of industries in which it is used, March Manufacturing is happy to provide clients with a variety of suggestions when looking for a pump. Examples of pumps available from March Pump that are designed to accommodate hydrofluoscilicic acid include pumps like the BC-4C-MD Magnetically Coupled Pump and the TE-5C-MD 1 Phase Magnetic Drive Pump, among many others. Many of the March’s available models for hydrofluosilicic acid are available with an explosion proof motor, like the TE-6T-MD 1&3 Phase Magnetic Drive Pumps, for example.
March Pumps strongly encourages clients to use their team of experts to find the right pump for their specific purposes and needs.
Disclaimer: These are only some of the pumps that can handle these chemicals.
What Industries and Applications Handle Hydrofluorosilicic Acid?
The most commonly known application of hydrofluorosilicic acid is water fluoridation at water treatment plants. It is up to 5 times less expensive than sodium fluoride, an alternative that can also be used to treat drinking water. As a result, hydrofluorosilicic acid has seen a major surge in demand in recent years. However, concentrations above 20 percent are more dangerous to store and handle than sodium fluoride and need adequate care and equipment.
The largest quantity of hydrofluorosilicic acid worldwide is converted to cryolite and aluminum fluoride. These materials are key in the process of converting aluminum ore into aluminum metal.
Hydrofluorosilicic acid is also used as an electrolyte in the Betts electrolytic process for refining lead and as the active compound in some rust removal cleaning products.
What are the Properties of Hydrofluorosilicic Acid that Will Affect the Chemical Pump You Purchase?
Hydrofluorosilicic acid can be the most dangerous chemical at a particular facility. In the case of evaporation, it releases hydrogen fluoride that is extremely corrosive and will harm the lungs if it is breathed. In addition, hydrofluorosilicic acid interacts with metals and produces a flammable hydrogen gas. These dangers, along with potential corrosion or leakage, can cause imminent harm to working personnel and equipment. Safety precautions should be a key consideration when choosing the right pump for handling hydrofluorosilicic acid.
Figure 1: Hydrofluorosilicic Acid Concentration and Pump Materials
A single or collection of material/s may be rated for a higher temperature/s then the pump as a whole is capable of. It is important to contact a March representative to determine if the pump as a complete unit is suitable for the concentration and temperature of any chemical.
What Pumps Can Manage Hydrofluorosilicic Acid and at What Temperature and Viscosity?
When pumping hydrofluorosilicic acid at room temperature, it is strongly recommended to choose a sealless magnetic drive chemical pump made out of Polypropylene. Hydrofluorosilicic acid is extremely corrosive and interacts with all kinds of metals. An Encapsulated Impeller, Carbon Bushing, and Viton O-ring will prevent all forms of leakage and ensure the safety of your working personnel and equipment.
Finding the Appropriate Hydrofluorosilicic Acid Pump
March Pumps offers chemical pumps that are specifically designed to handle hydrofluorosilicic acid. These pumps cover the whole range from 1 GPM to 200 GPM. Yet, the type of chemical pump you choose will greatly depend on the acid temperature, the concentration of the acid in use, its specific gravity along with a host of other factors. While a certain chemical pumps may seem appropriate for a particular application, it may not be the most cost effective solution or may even present safety concerns for your facility and staff.
If you need assistance with selecting the right hydrofluorosilicic acid pump, get in touch with our team for assistance and to discuss the options.
