Battery Manufacturing Applications for Our Pumps
The mass production of batteries requires the use of caustic solvents and acids. Mag drive pumps are required to transfer and evacuate chemicals used during the process. March pumps are designed to complete these tasks easily and quickly, as well as supply solvents at precise temperatures and flow rates.
Our pump models for battery manufacturing are built to tolerate caustic liquids like acetic and citric acid, hydrochloric acid, phosphoric acid, sulfuric acid and nitric acid. Flow rates can reach a maximum of 200 gallons per minute at 70 feet with a shutoff head of 160 feet.
Discover more about our pumps for battery manufacturing below:
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 200 GPM | 654 LPM |
| Max Head | 160 FT | 34.1 M |
Electrical/Air: 3Ph 230/460V 60Hz & 380V 50Hz, or 3Ph 575V 60Hz
Inlet: 3"MPT
Outlet: 2"MPT
Material: Natural Kynar (Front Housing, Rear Housing), Glass Filled Kynar (Impeller), Viton (Gasket), Carbon (Bushing), Ceramic (Shaft, Thrust Washers)
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 18 GPM | 60.5 LPM |
| Max Head | 29 FT | 6.3 M |
Electrical/Air: 1Ph 115/230V 60Hz, 1Ph 110/220V 50Hz, or 3Ph 230/460V 50/60Hz
Inlet: 1"FPT
Outlet: 1/2"MPT
Material: Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)