March Pump Series 10 are centrifugal magnetic drive pumps which have a maximum flow of 200GPM and a maximum head of 160 feet. They are available in Polypropylene, Kynar, and a combination of 316 Stainless Steel housings and a plastic impeller . The inlet is 3 inch and the outlet is 2 inch. They use a 10 horsepower three phase motor. Explosion proof motors for hazardous locations and 575V motors are additional options.
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 200 GPM | 654 LPM |
| Max Head | 160 FT | 34.1 M |
Electrical/Air: 3Ph 230/460V 60Hz & 380V 50Hz, or 3Ph 575V 60Hz
Inlet: 3"MPT
Outlet: 2"MPT
Material: Natural Kynar (Front Housing, Rear Housing), Glass Filled Kynar (Impeller), Viton (Gasket), Carbon (Bushing), Ceramic (Shaft, Thrust Washers)
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 200 GPM | 654 LPM |
| Max Head | 160 FT | 34.1 M |
Electrical/Air: 3Ph 230/460V 60Hz & 380V 50Hz, or 3Ph 575V 60Hz
Inlet: 3"MPT
Outlet: 2"MPT
Material: Polypropylene(Front Housing, Rear Housing, Impeller), Viton (Gasket), Carbon (Bushing), Ceramic (Shaft, Thrust Washers)
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 190 GPM | 738 LPM |
| Max Head | 107 FT | 34.4 M |
Electrical/Air: 3Ph 230/460V 60Hz & 380V 50Hz, or 3Ph 575V 60Hz
Inlet: 3"MPT
Outlet: 2"MPT
Material: 316 Stainless Steel (Front Housing, Rear Housing), Polypropylene (Impeller), Viton (Gasket), Carbon (Bushing), Ceramic (Shaft, Thrust Washers)
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 200 GPM | 654 LPM |
| Max Head | 160 FT | 34.1 M |
Electrical/Air: 3Ph 230/460V 60Hz & 380V 50Hz, or 3Ph 575V 60Hz
Inlet: 3" Class ANSI Class 150 Flange
Outlet: 2" Class ANSI Class 150 Flange
Material: Natural Kynar (Front Housing, Rear Housing), Glass Filled Kynar (Impeller), Viton (Gasket), Carbon (Bushing), Ceramic (Shaft, Thrust Washers)
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 200 GPM | 654 LPM |
| Max Head | 160 FT | 34.1 M |
Electrical/Air: 3Ph 230/460V 60Hz & 380V 50Hz, or 3Ph 575V 60Hz
Inlet: 3" ANSI Class 150 Flange
Outlet: 2" ANSI Class 150 Flange
Material: Polypropylene(Front Housing, Rear Housing, Impeller), Viton (Gasket), Carbon (Bushing), Ceramic (Shaft, Thrust Washers)
| Unit System | 60Hz | 50Hz |
|---|---|---|
| Max Flow | 120 GPM | 378 LPM |
| Max Head | 41 FT | 8.7 M |
Electrical/Air: 208/230/460 60Hz & 190/380V 50Hz
Inlet: 3"MPT
Outlet: 2"MPT
Material: Natural Kynar (Front Housing, Rear Housing), Carbon Filled Kynar (Impeller), Viton (Gasket), Carbon (Bushing), Ceramic (Shaft, Thrust Washers)