March Chemical Pumps for Formaldehyde

Seeking a pump for the chemical Formaldehyde, March Pumps has many choices!  From 5 GPM to 200 GPM, March Pumps has a pump for Formaldehyde for any application. 

If pumping the chemical Formaldehyde at room temperature, it is recommended to go with a centrifugal sealless magnetic drive chemical pump made up of Polypropylene or Kynar Plastic, Encapsulated Impeller and Teflon O-Ring.

The chemical Formaldehyde can also be heavy depending on the concentration and temperature.  If the specific gravity is more than 1.1, a trimmed impeller is absolutely necessary to prevent decoupling or overloading the motor. 

The following chemical pumps are a good place to start looking at when pumping the chemical Formaldehyde:

BC-3CP-MD with special Teflon O-Ring and possible trim for chemical Formaldehyde

BC-4C-MD with special Teflon O-Ring and possible trim for chemical Formaldehyde

BC-4K-MD with special Teflon O-Ring and possible trim for chemical Formaldehyde

TE-5C-MD with special Teflon O-Ring and possible trim for chemical Formaldehyde

TE-5K-MD with special Teflon O-Ring and possible trim for chemical Formaldehyde

TE-5.5C-MD with special Teflon O-Ring and possible trim for chemical Formaldehyde

TE-5.5K-MD with special Teflon O-Ring and possible trim for chemical Formaldehyde

TE-6T-MD with special Teflon O-Ring and possible trim for chemical Formaldehyde

 TE-6K-MD with special Teflon O-Ring and possible trim for chemical Formaldehyde

TE-7R-MD with special Teflon O-Ring and possible trim for chemical Formaldehyde

TE-7K-MD with special Teflon O-Ring and possible trim for chemical Formaldehyde

TE-7.5P-MD with special Teflon O-Ring and possible trim for chemical Formaldehyde

TE-7.5K-MD with special Teflon O-Ring and possible trim for chemical Formaldehyde

TE-8C-MD with special Teflon O-Ring and possible trim for chemical Formaldehyde

TE-8K-MD with special Teflon O-Ring and possible trim for chemical Formaldehyde

TE-10K-MD with special Teflon O-Ring and possible trim for chemical Formaldehyde

335-CP-MD with special Teflon O-Ring and possible trim for chemical Formaldehyde

Higher concentrations and higher temperatures of the chemical Formaldehyde together or by themselves, may make the pumps listed above unsuitable.  It is highly recommended, regardless of the temperature or concentration, that you contact a local distributor or March Manufacturing direct to review your application before ordering a pump.     

Listing of March Pump Formaldehyde Distributors

Warranty 

  
Search Our Pumps Distributor Map