893-10 Brushless 24V DC Pump

 March Pumpís 893-10 centrifugal sealless magnetic drive submersible DC brushless 24V pumps ideal for marine applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 2.7 GPM 11 LPM 2.7 GPM 11 LPM
Max Head 10.6 FT 3.3 M 10.6 FT 3.3 M
Power .006 HP .004 KW .006 HP .004 KW
Electrical 24V Range 12-28V
Submersible Yes

Type Centrifugal Mag Drive
Inlet 3/8"FPT
Outlet 3/8"OD
Wet End Noryl (Front and Rear Housings), Nylon (Impeller), Carbon/Teflon (Thrust Washer), Buna N (O-Ring), 316 Stainless Steel (Shaft), Ceramic Magnet
Uses Submersible or Open Air
When submerged, the following is also in contact with the solution Epoxy, Delrin, Motor Leads
P/N 0893-0031-0200
Note Product image may be different than actual product received.

Request Additional Product Info

March 893-10 Curve

893-10 24V Brushless Pump Manual


O-Ring: Buna N, Viton, Teflon, or Ethylene Propylene

Shaft: Ceramic or Stainless Steel

Series 1-MD Wet Ends may be used on Series 893 

Reference Information

Dimensional Drawing 893-10 

March Pump 893-10 3D Drawing3D Drawings Available In DWG, IPT, and STEP Format.







March Pump's industrial 893-10  is an American submersible seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and heat transfer. It is capable of generating a maximum flow of 2.7 gallons per minute at 1 foot, and its maximum head is 10.6 Feet (or around 4.5PSI).  The pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Noryl, Nylon, Carbon/Teflon, Buna N, Stainless Steel, and Ceramic Magnet.  When submerged Epoxy, Delrin, and the motor leads are also in contact with the solution. The inlet connection is 3/8 inch female pipe thread, and the outlet is 3/8 inch smooth. The standard motor is a 0.006 Horsepower DC Brushless Motor, available in 24 Volts.  The 24 Volt Motor has an operating range from 12 to 28 Volts.  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius when not submerged, or 130 Fahrenheit or 54 Celsius when submerged. The March 893-10 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March 893-10 is suitable for your application, please contact March Pump.

Perfect for Applications Including 

Applications for the 893-10 Magnetic Drive Pump include computer cooling, photographic processing equipment, refrigeration systems, and water displays. 


March Pumps are warranted to the original purchaser thereof to be free of defects in workmanship and materials. The 893 brushless motors used on 07 and 09 are warranted for 12 months from date of manufacture.  The 893 brushless motors used on 08 and 10 are warranted for 18 months from date of manufacture.   

For the complete warranty description, please click below.  http://www.marchpump.com/contact/warranty-registration/   

WARNING:  Cancer and Reproductive Harm- www.P65Warnings.ca.gov 

Search Our Pumps Distributor Map