TE-8K-MD-HF Magnetically Coupled Pump
|Max Flow||150 GPM||--||--||470 LPM|
|Max Head||95 FT||--||--||20 M|
|Power||5 HP||--||--||3.7 KW|
|Electrical||3Ph 208/230/460V 60HZ & 190/220/380V 50HZ|
|Type||Centrifugal Mag Drive|
|Wet End||Carbon filled Kynar (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)|
|Motor Options||Available in 5HP Explosion Proof and 575V|
|Note||Product image may be different than actual product received.|
O-Ring: Viton, Teflon Encapsulated Viton, or Ethylene Propylene
Front and Rear Thrust Washer: Ceramic or Hastelloy
Shaft: Ceramic or Hastelloy
Imp. Bushing: Carbon, Mica Teflon, or Ryton/Teflon/Carbon
Motor Bracket: Cast Iron or Plastic
* For Explosion Proof Drawing, please contact March.
March Pump's industrial TE-8K-MD-HF is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 150 gallons per minute at 15 feet, and its maximum head is 95 Feet (or around 41PSI). The standard wet end (the materials that come into contact with the solution) is composed of glass filled Kynar (PVDF), Viton, Carbon, and Ceramic. The inlet connection is 2 inch male pipe thread, and the outlet is 1-1/2 inch male pipe thread. The standard motor is a 3 Phase 60 hertz 208/230/460 and 50 hertz 190/220/380V 5 horsepower totally enclosed fan cooled motor. The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 200 Fahrenheit or 93 Celsius. The March TE-8K-MD-HF centrifugal magnetic drive pump is capable of handling mildly, or highly corrosive chemicals, acids, and solvents. To determine if the March TE-8K-MD-HF is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the TE-8K-MD-HF Magnetic Drive Pump include chemical recirculation, chemical transfer, deionized water systems, scrubber systems, detergent mixers, computer cooling, waste treatment plants, and plating operations.
Great for Chemicals Including
The TE-8K-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide, Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-8K-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the TE-8K-MD for any of the above listed chemicals Chemical Resistance Chart
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov