SP-TE-7P-MD 1&3 Phase Mag Drive Pump
|Max Flow||53 GPM||200 LPM||47.5 GPM||180 LPM|
|Max Head||52 FT||15.8 M||36.1 FT||11 M|
|Power||1 HP||.746 KW||1 HP||.746 KW|
|Electrical||1Ph 115/230V or 3Ph 230/460V 50/60HZ|
|On 50HZ, the Single Phase Motor is rated for 1 horsepower or 0.7457 kilowatts. |
On 50HZ, the Three Phase Motor is rated for 1 horsepower or 0.7457 kilowatts.
|Type||Centrifugal Mag Drive|
|Wet End||Polypropylene (Housings, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)|
O-Ring: Viton or Teflon Encapsulated Viton
Imp. Bushing: Carbon, Ceramic, Mica Teflon, or Ryton/Teflon/Carbon
3D Drawings Available in STEP Format
March Pump's industrial SP-TE-7P-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 53 Feet (or around 23PSI). When the SP-TE-7P-MD is fully primed, it is capable of having a suction lift of 12 feet. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Carbon, and Ceramic. The inlet connection is 1-1/2 inch male pipe thread, and the outlet is 1 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 1 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 40PSI, and the maximum liquid temperature is 180 Fahrenheit or 82 Celsius. The March SP-TE-7P-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March SP-TE-7P-MD is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the SP-TE-7P-MD Magnetic Drive Self Priming Pump include chemical recirculation, chemical transfer, and scrubber systems. They are ideal for non ported tanks and siphon feed tanks.
Great for Chemicals Including
The SP-TE-7P-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The SP-TE-7P-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the SP-TE-7P-MD for any of the above listed chemicals. Chemical Resistance Chart