TE-5.5S-MD 1&3 Phase Mag Drive Pump
|Max Flow||30 GPM||114 LPM||27 GPM||102 LPM|
|Max Head||41 FT||12.5 M||29.5 FT||9 M|
|Power||.33 HP||.25 KW||.33 HP||.25 KW|
|Electrical||1PH 115/230V or 3PH 230/460V 50/60HZ|
|Type||Centrifugal Mag Drive|
|Wet End||316 Stainless Steel (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)|
|Motor Options||Available in Explosion Proof|
O-Ring: Viton, Teflon encapsulated Viton, or Ethylene Propylene
Front Thrust Washer: Ceramic or Hastelloy
Shaft: Ceramic or Hastelloy
Impeller: Polypropylene, Carbon Filled Kynar, Natural Kynar, or 316 Stainless Steel
Imp. Bushing: Carbon, Ceramic, Mica Teflon, Ryton/Teflon/Carbon
* For Explosion Proof Drawing, please contact March.
March Pump's industrial TE-5.5S-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (or around 18PSI). The standard wet end (the materials that come into contact with the solution) is composed of 316 Stainless Steel, Viton, Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 3/4 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.33 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. The March TE-5.5S-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-5.5S-MD is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the TE-5.5S-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.
Great for Chemicals Including
The TE-5.5S-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Potassium Chloride, Potassium Hydroxide, Sodium Chloride, Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, and many more chemicals. The TE-5.5S-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the TE-5.5S-MD for any of the above listed chemicals. Chemical Resistance Chart