809-SS 12V & 24V Mag Drive Pump
|Max Flow||5 GPM||18.9 LPM||5 GPM||18.9 LPM|
|Max Head||7.1 FT||2.1 M||7.1 FT||2.1 M|
|Power||.01 HP||.007 KW||.01 HP||.007 KW|
|Electrical||12V Range 0-14 or 24V Range 0-26|
|Type||Centrifugal Mag Drive|
|Wet End||Stainless Steel ( Front and Rear Housing, Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)|
March Pump's industrial 809-SS 12V & 24V is an American seal-less centrifugal magnetic drive pump ideal for applications such as hot water systems. It is capable of generating a maximum flow of 5 gallons per minute at 1.5 feet, and its maximum head is 7 Feet (or around 3PSI). The standard wet end (the materials that come into contact with the solution) is composed of Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 1/2 inch male pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a 0.01 Horsepower DC Brush Type Motor, available in 12 or 24 Volts. The 12 Volt motor has an operating range from 0 to 14 Volts, and the 24 Volt motor has an operating range from 0 to 26 Volts. The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. To determine if the March 809-SS 12V & 24V is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the 809-SS 12V & 24V Magnetic Drive Pump include hot water systems and solar heating.
Great for Chemicals Including
The 809-SS 12V & 24V has pumped Cutting Oils, Ethylene Glycol, Hot Wort, Hot Water and Salt Water. The 809-SS 12V & 24V may have been modified to handle these chemicals. Please contact March Pump to review your application before using the 809-SS 12V & 24V for any of the above listed chemicals. Chemical Resistance Chart
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov