815-PL Beer Pump
|Max Flow||7 GPM||26.5 LPM||6 GPM||22.7 LPM|
|Max Head||18.6 FT||5.7 M||13.5 FT||4.1 M|
|Power||.04 HP||.029 KW||.04 HP||.029 KW|
|Type||Centrifugal Mag Drive|
|Wet End||Polysulfone (Front Housing), Stainless Steel (Rear Housing and Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)|
|Can handle liquids of 250F||Materials are FDA Food Compliant|
|With 6 Foot Cord and Plug||Components are UL Recognized|
March Pump's 815-PL Beer Pump is an American seal-less centrifugal magnetic drive pump ideal for home brewing. It is capable of generating a maximum flow of 7 gallons per minute at 4.5 feet, and its maximum head is 18.6 Feet (or around 8PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polysulfone, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 1/2 inch male pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The 815-PL Beer Pump motor has a six foot cord, a plug, and a base. The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. To determine if the March 815-PL Beer Pump is suitable for your application, please contact March Pump.
Great for Chemicals Including
The 815-PL Beer Pump has pumped Hot Water and Hot Wort. The 815-PL Beer Pump may have been modified to handle these chemicals. Please contact March Pump to review your application before using the 815-PL Beer Pump for any of the above listed chemicals.