TE-5SSB-MD Beer Pump
|Max Flow||18 GPM||68.1 LPM||15.9 GPM||60 LPM|
|Max Head||29 FT||8.9 M||20.7 FT||6.3 M|
|Power||.2 HP||.149 KW||.2 HP||.149 KW|
|Electrical||1PH 115/230V 50/60HZ|
|Type||Centrifugal Mag Drive|
|Wet End||Polysulfone (Impeller), 316 Stainless Steel (Front and Rear Housing, Magnet Shell, Shaft), Buna N (O-Ring), Ceramic (Thrust Washers)|
|Can handle liquids of 250F||Materials are FDA Food Compliant|
|American Made||Components are UL Recognized|
March Pump's TE-5SSB-MD Beer Pump is an American seal-less centrifugal magnetic drive pump ideal for homebrewing. It is capable of generating a maximum flow of 18 gallons per minute at 1 foot, and its maximum head is 29 Feet (or around 12PSI). The standard wet end (the materials that come into contact with the solution) is composed of Stainless Steel, Polysulfone, Buna N, Ceramic, and Ceramic Magnet. The inlet connection is 1 inch female pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a 1 Phase 115V/230V 0.2 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. To determine if the March TE-5SSB-MD Beer Pump is suitable for your application, please contact March Pump.
Great for Chemicals Including
The TE-5SSB-MD Beer Pump has pumped Hot Water and Hot Wort. The TE-5SSB-MD Beer Pump may have been modified to handle these chemicals. Please contact March Pump to review your application before using the TE-5SSB-MD Beer Pump for any of the above listed chemicals.