March Chemical Pumps for Sodium Cyanide

Seeking a pump for the chemical Sodium Cyanide, March Pumps has many choices!  From 1 GPM to 200 GPM, March Pumps has a pump for Acetic Acid for any application. 

If pumping the chemical Sodium Cyanide at room temperature, it is recommended to go with a centrifugal sealless magnetic drive chemical pump made up of Polypropylene or Kynar Plastic.

The chemical Sodium Cyanide can also be heavy depending on the concentration and temperature.  If the specific gravity is more than 1.1, a trimmed impeller is absolutely necessary to prevent decoupling or overloading the motor. 

The following chemical pumps are a good place to start looking at when pumping the chemical Sodium Cyanide:

March Pumpís AC-2CP-MD centrifugal sealless magnetic drive pumps ideal for chemical applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 5 GPM 18.9 LPM 4.9 GPM 18.5 LPM
Max Head 13 FT 4 M 8.9 FT 2.7 M
Power .025 HP .018 KW .025 HP .018 KW
Electrical 115V 50/60HZ or 230V 50/60HZ

Type Centrifugal Mag Drive
Inlet 3/8"FPT & 3/4"MPT
Outlet 1/4"MPT
Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washer), Ceramic Magnet
P/N 0125-0069-0100 (115V)
P/N 0125-0069-0300 (230V)

Request Additional Product Info

March Pumpís AC-3CP-MD centrifugal sealless magnetic drive pumps ideal for industrial applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 10 GPM 37.8 LPM 8.7 GPM 33 LPM
Max Head 20.5 FT 6.25 M 14.7 FT 4.5 M
Power .06 HP .04 KW .06 HP .04 KW
Electrical 115V 60HZ or 230V 50/60HZ

Type Centrifugal Mag Drive
Inlet 3/4"FPT
Outlet 1/2"MPT
Wet End Polypropylene (Front and Rear Housing, Impeller), Buna N (O-Ring), Ceramic (Shaft, Thrust Washer), Ceramic Magnet
P/N 0130-0018-0100 (115V)
P/N 0130-0018-0200 (230V)

Request Additional Product Info

March Pumpís AC-4C-MD centrifugal sealless magnetic drive pumps ideal for industrial applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 14 GPM 53 LPM 13.2 GPM 50 LPM
Max Head 21.5 FT 6.55 M 15.4 FT 4.7 M
Power .083 HP .062 KW .83 HP .062 KW
Electrical 115V 50/60HZ or 230V 50/60HZ

Type Centrifugal Mag Drive
Inlet 1"FPT
Outlet 1/2"MPT
Wet End Polypropylene (Front and Rear Housing, Impeller), Buna N (O-Ring), Ceramic (Shaft, Thrust Washers), Ceramic Magnet
Available with 750 Priming Chamber
P/N 0145-0010-0100 (115V)
P/N 0145-0010-0200 (230V)

Request Additional Product Info

March Pumpís AC-5C-MD centrifugal sealless magnetic drive pumps ideal for industrial applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 17 GPM 64.4 LPM 15.9 GPM 60 LPM
Max Head 27 FT 8.2 M 19.7 FT 6 M
Power .125 HP .093 KW .125 HP .093 KW
Electrical 115V 50/60HZ or 230V 50/60HZ

Type Centrifugal Mag Drive
Inlet 1"FPT
Outlet 1/2"MPT
Wet End Polypropylene (Front and Rear Housing, Impeller), Buna N (O-Ring), Ceramic (Shaft, Thrust Washers), Ceramic Magnet
Available with 750 Priming Chamber
P/N 0150-0026-0100 (115V)
P/N 0150-0136-0100 (230V)

Request Additional Product Info

March Pumpís TE-5.5C-MD centrifugal sealless magnetic drive pumps constructed from Polypropylene ideal for chemical applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 30 GPM 114 LPM 27 GPM 102 LPM
Max Head 41 FT 12.5 M 29.5 FT 9 M
Power .33 HP .25 KW .33 HP .25 KW
Electrical 1PH 115/208/230V 60HZ, 115/230V 50HZ or 3PH 208/230/460V 60HZ, 190/220/415V 50HZ

Type Centrifugal Mag Drive
Inlet 1"FPT
Outlet 3/4"MPT
Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)
Motor Options Available in Explosion Proof
P/N 0151-0027-0100 (1 Phase)
P/N 0151-0027-0800 (3 Phase)

Request Additional Product Info

March Pumpís TE-6T-MD centrifugal sealless magnetic drive pumps ideal for chemical transfer.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 38 GPM 144 LPM 30 GPM 113.5 LPM
Max Head 49 FT 15 M 36 FT 11 M
Power .5 HP .372 KW .375 HP .279 KW
Electrical 1PH 115/208/230V 60HZ, 115/230V 50HZ or 3PH 208/230/460V 60HZ, 230/460V 50HZ
On 50HZ, the Single Phase Motor is rated for 0.375 horsepower or 0.279 kilowatts.
On 50HZ, the Three Phase Motor is rated for 0.5 horsepower or 0.372 kilowatts.

Type Centrifugal Mag Drive
Inlet 1"FPT
Outlet 3/4"MPT
Wet End Polypropylene (Impeller), Ryton (Front Housing, Rear Housing), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Ryton/Teflon/Carbon (Bushing)
Motor Options Available in 1HP Explosion Proof
P/N 0153-0002-0200 (1 Phase)
P/N 0153-0002-0300 (3 Phase)

Request Additional Product Info

March Pumpís TE-7R-MD centrifugal sealless magnetic drive pumps ideal for chemical applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 53 GPM 200 LPM 47.5 GPM 180 LPM
Max Head 60 FT 18.3 M 40.3 FT 12.3 M
Power .75 HP .507 KW .68 HP .559 KW
Electrical 1PH 115/208/230V 60HZ, 115/230V 50HZ or 3PH 208/230/460V 60HZ, 190/380V 50HZ
On 50HZ, the Single Phase Motor is rated for 0.68 horsepower or 0.5 kilowatts.
On 50HZ, the Three Phase Motor is rated for 0.75 horsepower or 0.55 kilowatts.

On 50hz, a 1 horsepower or 0.75 kilowatts motor is also available for both Single and Three phase.

Type Centrifugal Mag Drive
Inlet 1-1/2"FPT
Outlet 1"MPT
Wet End Polypropylene (Front Housing, Impeller), Ryton (Rear Housing), Viton (O-Ring), Ceramic (Shaft, Thrust Washer), Ryton/Teflon/Carbon (Bushing)
Motor Options Available in .75HP, 1HP, 1.5HP, 1HP Explosion Proof, or 1.5HP Explosion Proof
P/N 0155-0011-0200 (1 Phase 3/4HP)
P/N 0155-0011-0400 (3 Phase 3/4HP)
P/N 0155-0173-0100 (1 Phase 1HP)
P/N 0155-0174-0100 (1 Phase 1HP)

Request Additional Product Info

March Pumpís TE-7.5K-MD centrifugal sealless magnetic drive pumps constructed from Natural Kynar ideal for chemical applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 82 GPM 310 LPM 71 GPM 268 LPM
Max Head 85 FT 26 M 59 FT 18 M
Power 2 HP 1.49 KW 1.5 HP 1.118 KW
Electrical 1PH 115/208/230V 60HZ & 100/200V 50HZ or 3Ph 208/230/460V 60HZ & 190/380V 50HZ
On 50HZ, the Single Phase Motor is rated for 1.5 horsepower or 1.1 kilowatts.
On 50HZ, the Three Phase Motor is rated for 1.5 horsepower or 1.1 kilowatts.

Type Centrifugal Mag Drive
Inlet 2"MPT
Outlet 1-1/2"MPT
Wet End Natural Kynar (Front Housing, Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)
Motor Options Available in Explosion Proof and 575V Motor
P/N 0156-0001-0100 (3 Phase 2HP)
P/N 0156-0001-0200 (1 Phase 2HP)

Request Additional Product Info

March Pumpís TE-8C-MD centrifugal sealless magnetic drive pumps ideal for chemical applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 120 GPM 454 LPM 105 GPM 400 LPM
Max Head 95 FT 29 M 65 FT 20 M
Power 3 HP 2.2 KW 3 HP 2.2 KW
Electrical 3Ph 208/230/460V 60HZ & 190/220/380V 50HZ

Type Centrifugal Mag Drive
Inlet 2"MPT
Outlet 1-1/2"MPT
Wet End Polypropylene (Front Housing, Impeller), Carbon Filled Polypropylene (Rear Housing), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Teflon/Ryton/Carbon (Bushing)
Motor Options Available in 3HP and 5HP, 5HP Explosion Proof, and 5HP 575V
P/N 0157-0008-0100 (3 Phase 3HP)
P/N 0157-0008-0700 (3 Phase 5HP)

Request Additional Product Info

March Pumpís TE-10K-MD centrifugal sealless magnetic drive pumps constructed from Kynar ideal for chemical applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 200 GPM 757 LPM 172 GPM 654 LPM
Max Head 160 FT 48.7 M 112 FT 34.1 M
Power 10 HP 7.46 KW 10 HP 7.46 KW
Electrical 3Ph 208/230/460V 60HZ & 190/220/380V 50HZ

Type Centrifugal Mag Drive
Inlet 3"MPT
Outlet 2"MPT
Wet End Natural Kynar (Front Housing, Rear Housing), Carbon Filled Kynar (Impeller), Viton (Gasket), Carbon (Bushing), Ceramic (Shaft, Thrust Washers)
Motor Options Available in 10HP Explosion Proof and 575V
P/N 0161-0016-0100

Request Additional Product Info

March Pumpís 320-CP-MD centrifugal sealless magnetic drive pumps constructed from Polypropylene ideal for low flow high head applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 3.3 GPM 12.5 LPM 2.9 GPM 11.3 LPM
Max Head 40 FT 12.2 M 28.8 FT 8.8 M
Power .083 HP .062 KW .083 HP .062 KW
Electrical 115V 50/60HZ or 230V 50/60HZ

Type Centrifugal Mag Drive
Inlet 1/2"MPT
Outlet 3/8"MPT
Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft and Thurst Washer)
Motor Options Air Cooled or Blast Cooled
P/N 0320-0001-0300 (115V)
P/N 0320-0001-0800 (230V)

Request Additional Product Info

March Pumpís 335-CP-MD centrifugal sealless magnetic drive pumps constructed from Polypropylene ideal for low flow high head applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 12 GPM 45.4 LPM 10 GPM 37.8 LPM
Max Head 68 FT 20.7 M 47.9 FT 14.6 M
Power .33 HP .249 KW .33 HP .249 KW
Electrical 1PH 115/208/230V 60HZ, 115/230V 50HZ or 3PH 208/230/460V 60HZ, 190/220/415 50HZ

Type Centrifugal Mag Drive
Inlet 3/4"MPT
Outlet 3/4"MPT
Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft and Thurst Washer)
Motor Options Available in Explosion Proof
P/N 0335-0001-0100 (1 Phase)
P/N 0335-0001-0200 (3 Phase)

Request Additional Product Info

Higher concentrations and higher temperatures of the chemical Sodium Cyanide together or by themselves, may make the pumps listed above unsuitable.  It is highly recommended, regardless of the temperature or concentration, that you contact a local distributor or March Manufacturing direct to review your application before ordering a pump.     

Listing of March Pump Sodium Cyanide Distributors

Chemical Pumps for Sodium Cyanide

Sodium Cyanide, chemically written as NaCN, is a toxic chemical that is beneficial to a wide-range of industries such as the development of pesticides. Sodium cyanide is also commonly used in mining.

Sodium cyanide, is extremely toxic and has a high boiling point, it requires a very specific chemical pump. Suggestions of pumps for sodium cyanide from March Pump include, but are not limited to the AC-2CP-MD and the TE-5.5C-MD, among many others. Many of the models from March Pump for designed to handle sodium cyanide use a Polypropylene housing and impeller and are potentially available with an explosion proof motor.

March Pump has a committed team of experts who understand the complexities of the chemicals that clients are pumping. As such, the March Pump team works hard to help clients find the perfect pump for the chemical or chemicals that they are working with all the while resolving the businesses and industrial challenges that they face in conjunction with their pumping tasks.

Disclaimer: These are only some of the pumps that can handle these chemicals.

Warranty 

March Manufacturing Inc. Warranty and Warranty Registration

Search Our Pumps Distributor Map