TE-6P-MD 1&3 Phase Mag Drive Pump

March Pumpís TE-6P-MD centrifugal sealless magnetic drive pumps ideal for chemical transfer.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 38 GPM 144 LPM 30 GPM 113.5 LPM
Max Head 49 FT 15 M 36 FT 11 M
Power .5 HP .372 KW .375 HP .279 KW
Electrical 1PH 115/208/230V 60HZ, 115/230V 50HZ or 3PH 208/230/460V 60HZ, 230/460V 50HZ
On 50HZ, the Single Phase Motor is rated for 0.375 horsepower or 0.279 kilowatts.
On 50HZ, the Three Phase Motor is rated for 0.5 horsepower or 0.372 kilowatts.

Type Centrifugal Mag Drive
Inlet 1"FPT
Outlet 3/4"MPT
Wet End Polypropylene (Impeller, Front Housing, Rear Housing), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Ryton/Teflon/Carbon (Bushing)
Motor Options Available in 1HP Explosion Proof
P/N 0153-0095-0100 (1 Phase)
P/N 0153-0095-0200 (3 Phase)

Request Additional Product Info

March TE-6P-MD Curve 60HZ 

March TE-6P-MD Curve 50HZ 

March TE-6P-Pump Manual


O-Ring: Viton, Teflon Encapsulated Viton, or Ethylene Propylene

Front Thrust Washer: Ceramic or Hastelloy

Shaft: Ceramic, Hastelloy, or 316 Stainless Steel

Imp. Bushing: Carbon, Mica Teflon, or Ryton/Teflon/Carbon

Flanges Available

Pump Base Available

Reference Information

Dimensional Drawing TE-6P-MD 1PH

Dimensional Drawing TE-6P-MD 3PH 

* For Explosion Proof Drawing, please contact March.  

March Pump's industrial TE-6P-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 38 gallons per minute at 10 feet, and its maximum head is 49 Feet (or around 21PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 3/4 inch male pipe thread.  There are two standard motors.  The first is a 1 Phase 60 hertz 115/208/230V and 50 hertz 115/230V 0.5 horsepower totally enclosed fan cooled motor.  The second is a 3 Phase 60 hertz 208/230/460V and 50 hertz 230/460V 0.5 horsepower totally enclosed fan cooled motor.  There are performance differences between the hert options.  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-6P-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-6P-MD is suitable for your application, please contact March Pump.

Perfect for Applications Including  

Applications for the TE-6P-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, bicarbonate systems, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, silver recovery systems, and marine air conditioners. 

Great for Chemicals Including

The TE-6P-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.  The TE-6P-MD may have been modified to handle these chemicals.  Please contact March Pump to review your application before using the TE-6P-MD for any of the above listed chemicals.  Chemical Resistance Chart


March Manufacturing Inc. Warranty and Warranty Registration  

    WARNING:  Cancer and Reproductive Harm- www.P65Warnings.ca.gov    


Search Our Pumps Distributor Map