TE-6K-MD 1&3 Phase Mag Drive Pump
|Max Flow||38 GPM||144 LPM||30 GPM||113.5 LPM|
|Max Head||49 FT||15 M||36 FT||11 M|
|Power||.5 HP||.279 KW||.375 HP||.372 KW|
|Electrical||1PH 115/230V or 3PH 230/460V 50/60HZ|
|On 50HZ, the Single Phase Motor is rated for 0.375 horsepower or 0.279 kilowatts. |
On 50HZ, the Three Phase Motor is rated for 0.5 horsepower or 0.372 kilowatts.
|Type||Centrifugal Mag Drive|
|Wet End||Carbon Filled Kynar (Front Housing, Rear Housing, Impeller), Ceramic (Shaft, Thrust Washers), Viton (O-Ring), Carbon (Bushing)|
|Motor Options||Available in 1HP Explosion Proof|
O-Ring: Viton, Teflon Encapsulated Viton, or Ethylene Propylene
Front Thrust Washer: Ceramic or Hastelloy
Shaft: Ceramic, Hastelloy, or 316 Stainless Steel
Imp. Bushing: Carbon, Mica Teflon, or Ryton/Teflon/Carbon
* For Explosion Proof Drawing, please contact March.
March Pump's industrial TE-6K-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 38 gallons per minute at 10 feet, and its maximum head is 49 Feet (or around 21PSI). The standard wet end (the materials that come into contact with the solution) is composed of carbon filled Kynar (PVDF), Viton, Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 3/4 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.5 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 200 Fahrenheit or 93 Celsius. The March TE-6K-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-6K-MD is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the TE-6K-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.
Great for Chemicals Including
The TE-6K-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide, Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-6K-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the TE-6K-MD for any of the above listed chemicals. Chemical Resistance Chart