1C-MD Mag Drive Pump
|Max Flow||3 GPM||11.3 LPM||2.4 GPM||9 LPM|
|Max Head||4.6 FT||1.4 M||3.3 FT||1 M|
|Power||.005 HP||.003 KW||.005 HP||.003 KW|
|Electrical||115V 50/60HZ or 230V 50/60HZ|
|Type||Centrifugal Mag Drive|
|Wet End||Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet|
|Uses||Submersible or Open Air|
|When submerged, the following is also in contact with the solution||Epoxy, Noryl, SJT Cord|
Housings: Polypropylene or Carbon Filled Kynar
O-Ring: Buna N, Viton, Teflon, or Ethylene Propylene
Shaft: Ceramic or 316 Stainless Steel
Impeller: Nylon or Carbon Filled Kynar
Stainless Steel Base Available
March Pump's industrial 1C-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.5 Feet (or around 2PSI). The 1C-MD pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless steel, and Ceramic Magnet. When submerged, Epoxy, Noryl, and the SJT Cord are also in contact with the solution. The inlet connection is 1/4 inch male pipe thread, and the outlet is 1/4 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.005 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 160 Celsius in open air, or 87 Fahrenheit or 71 Celsius if submerged. The March 1C-MD centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals. To determine if the March 1C-MD is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the 1C-MD Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
Great for Chemicals Including
The 1C-MD has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The 1C-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the 1C-MD for any of the above listed chemicals.
Chemical Resistance Chart