802 Dual Head Mag Drive Pump
|Max Flow||8 GPM||26 LPM|
|Max Head||16.5 FT||3.9 M|
|Power||.125 HP||.093 KW|
|Electrical||1PH 230V 50/60HZ|
|Type||Centrifugal Mag Drive|
|Wet End||Polypropylene (Front Housing, Impeller), Carbon Filled Kynar (Rear Housing), Ryton/Teflon/Carbon (Thrust Washer), Ethylene Propylene (O-Ring), 316 Stainless Steel (Screw), Ceramic Magnet|
March Pump's industrial 802 is an American seal-less Dual Head centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 8 gallons per minute at 3 feet, and its maximum head is 16.5 Feet (or around 7PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, carbon filled Kynar (PVDF), Ryton/Teflon/Carbon, Ethylene Propylene, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.5 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 230V 0.125 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March 802 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March 802 is suitable for your application, please contact March Pump.
Perfect for Applications Including
The 802 dual head magnetic drive pump is ideal for applications requiring simultaneous pumping of two different solutions.
Great for Chemicals Including
The 802 has pumped Developers for the Photographic Industry. The 802 may have been modified to handle these chemicals. Please contact March Pump to review your application before using the 802 for any of the above listed chemicals. Chemical Resistance Chart
March Pumps are warranted to the original purchaser thereof to be free of defects in workmanship and materials under normal use for a period of twelve (12) months from the date of manufacture. This warranty will be extended to (12) months from the date of original installation if the warranty card is completely filled in and returned to March or register online at www.marchpump.com/warranty-registraton
This warranty covers only units properly installed and maintained in accordance with March instructions. Any March pump which the purchaser considers to be defective must be returned to the source where it was purchased. If the pump is found by March to be defective in workmanship or materials under normal use within the warranty period March, at its option, will either replace or repair the pump. This warranty does not cover any costs associated with the installation or removal of the pump. If the pump was damaged in transit, you should file a claim with the carrier.
Before using the pump, the purchaser or installer should determine the suitability of the pump for its intended use. Purchaser assumes all risk and liability whatsoever in connection with such use or installation.
MARCH'S SOLE LIABILITY AND THE SOLE REMEDY FOR ANY BREACH OF WARRANTY SHALL BE AS SET FORTH ABOVE. THE WARRANTY SET FORTH ABOVE IS IN LIEU OF ALL OTHER WARRANTIES OF MARCH. WHETHER WRITTEN, ORAL OR IMPLIED, AND MARCH HEREBY DISCLAIMS ANY OTHER REPRESENTATION OR WARRANTY EITHER EXPRESSED OR IMPLIED AS TO ANY MATTER WHATSOEVER, INCLUDING WITHOUT LIMITATION THE DESIGN OF THE PUMP. ITS MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE AND ITS CONFORMITY TO THE PROVISIONS AND SPECIFICATIONS OF ANY PURCHASE ORDER, ORDER OR OTHER DOCUMENT OR STATEMENT RELATING THERETO. IN NO EVENT SHALL MARCH BE LIABLE FOR LIQUIDATED, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING STRICT LIABILITY IN TORT, LOSS OF PRODUCTION OR DELAYS IN CONSTRUCTION).
The user must exercise primary responsibility in selecting the product's materials of construction, which are compatible with the liquid/s that come in contact with the product. The user may consult March Manufacturing or a distributor to seek a recommendation of the product's materials of construction that the offers the optimum available chemical compatibility. However neither March or the distributor shall be liable for product damage or failure, injuries, or any other damage or loss arising out of a reaction, interaction or any chemical effect that occurs between the materials of the product's construction and the liquids that come into contact the product.