TE-7SSB-MD Beer Pump
|Max Flow||53 GPM||200 LPM||47.5 GPM||180 LPM|
|Max Head||60 FT||17.5 M||39.4 FT||12.3 M|
|Power||1 HP||.75 KW||1 HP||.75 KW|
|Electrical||1Ph 115/208/230V 60HZ, 115/230V 50HZ or 3Ph 208/230/460V 60HZ, 190/380V 50HZ|
|Type||Centrifugal Mag Drive|
|Inlet||1.5" Tri Clamp|
|Outlet||1" Tri Clamp|
|Wet End||316 Stainless Steel (Front Housing, Rear Housing), Glass Filled Kynar ( Impeller), EPDM (O-Ring), Ceramic (Shaft, Thrust Washers), Mica Teflon (Bushing)|
|Motor Options||Available in 3/4HP, 1HP, 1.5HP, 1HP Explosion Proof or 1.5HP Explosion Proof.|
|Can Handle Liquid Up To 225F||Materials are FDA Food Compliant|
|American Made||Components are UL Recognized. Motors have UL File Numbers|
|P/N||0155-0249-0300 (1 Phase 1HP)|
|P/N||0155-0249-0400 (3 Phase 1HP)|
* The above picture does not show the latest configuration of this pump.
March Pump's TE-7SSB-MD Beer Pump is an American seal-less centrifugal magnetic drive pump ideal for homebrewing. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 57.5 Feet (or around 25PSI). The standard wet end (the materials that come into contact with the solution) is composed of 316 Stainless Steel, Glass Filled Kynar, EPDM, Mica Teflon, and Ceramic. The inlet connection is 1.5 inch Tri Clamp, and the outlet is 1 inch Tri Clamp. The standard motor is a 1 Phase 115V/230V 1 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 225 Fahrenheit or 107 Celsius. To determine if the March TE-7SSB-MD Beer Pump is suitable for your application, please contact March Pump.
Great for Chemicals Including
The TE-7SSB-MD Beer Pump has pumped Hot Water and Hot Wort. The TE-7SSB-MD Beer Pump may have to modified to handle other chemicals. Please contact March Pump to review your application before using the TE-7SSB-MD Beer Pump.