1A-MD-3/8 Mag Drive Pump
| Max Flow | 2.3 GPM | 8.7 LPM |
|---|---|---|
| Max Head | 4.6 FT | 1 M |
| Power | .005 HP | .003 KW |
| Electrical | 115V 50/60HZ or 230V 50/60HZ | |
| Submersible | Submersible | |
| 60HZ | 50HZ | |
| Inlet | 3/8"OD |
|---|---|
| Outlet | 3/8"OD |
| Wet End | Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 SS (Shaft), Ceramic Magnet |
| Uses | Submersible or Open Air |
| When submerged, the following is also in contact with the solution | Epoxy, Noryl, SJT Cord |
Options:
Housings: Polypropylene or Carbon Filled Kynar
O-Ring: Buna N, Viton, Teflon, or Ethylene Propylene
Shaft: Ceramic or 316 Stainless Steel
Impeller: Nylon or Carbon Filled Kynar
Stainless Steel Base Available
Dimensional Drawing 1A-MD-3/8 115V
Dimensional Drawing 1A-MD-3/8 230V
Dimensional Drawing 1A-MD-3/8 115V DWG (144 KB)
Dimensional Drawing 1A-MD-3/8 230V DWG (142 KB)
Applications for the 1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.
