893-04 Brush 12V DC Pump
|Max Flow||2.7 GPM||11 LPM|
|Max Head||10.6 FT||3.3 M|
|Power||.006 HP||.004 KW|
|Electrical||12V Range 0-14|
|Type||Centrifugal Mag Drive|
|Wet End||Noryl (Front and Rear Housings), Nylon (Impeller), Carbon/Teflon (Thrust Washer), Buna N (O-Ring), 316 Stainless Steel (Shaft), Ceramic Magnet|
|Uses||Pump must be used submerged|
|When submerged, the following is also in contact with the solution||Epoxy, Delrin, Motor Leads|
O-Ring: Buna N, Viton, Teflon, or Ethylene Propylene
Shaft: Ceramic or Stainless Steel
Series 1-MD Wet Ends may be used on Series 893
March Pump's industrial 893-04 is an American submersible seal-less centrifugal magnetic drive pump ideal for applications such as marine equipment. It is capable of generating a maximum flow of 2.7 gallons per minute at 1 foot, and its maximum head is 10.6 Feet (or around 4.5PSI). The 893-04 must be used submerged. The standard wet end (the materials that come into contact with the solution) is composed of Noryl, Nylon, Carbon/Teflon, Buna N, Stainless Steel, and Ceramic Magnet. When submerged Epoxy, Delrin, and the motor leads are also in contact with the solution. The inlet connection is 0.375 inch female pipe thread, and the outlet is 0.375 inch smooth. The standard motor is a 0.006 Horsepower DC Brushtype Motor, available in 12 Volts. The 12 Volt Motor has an operating range from 0 to 14 Volts. The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 160 Fahrenheit or 71 Celsius. The March 893-04 centrifugal magnetic drive pump is capable of handling mild corrosive chemicals, acids, and solvents. To determine if the March 893-04 is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the 893-04 Magnetic Drive Pump include marine equipment and water displays.
March Pumps are warranted to the original purchaser thereof to be free of defects in workmanship and materials. The 893 brush type motors used on 03,04,05, & 06 have a rated brush life of 2,800 hours. They are warranted for 2,800 hours or 12 months, whichever comes first. The 893 brushless motors used on 07,08,09, &10 have a rated life of 50,000 hours and are warranted for 18 months from date of manufacture.
This warranty covers only units properly installed and maintained in accordance with March instructions. Any March pump which the purchaser considers to be defective must be returned to the source where it was purchased. If the pump is found by March to be defective in workmanship or materials under normal use within the warranty period March, at its option, will either replace or repair the pump. This warranty does not cover any costs associated with the installation or removal of the pump. If the pump was damaged in transit, you should file a claim with the carrier.
Before using the pump, the purchaser or installer should determine the suitability of the pump for its intended use. Purchaser assumes all risk and liability whatsoever in connection with such use or installation.
MARCH'S SOLE LIABILITY AND THE SOLE REMEDY FOR ANY BREACH OF WARRANTY SHALL BE AS SET FORTH ABOVE. THE WARRANTY SET FORTH ABOVE IS IN LIEU OF ALL OTHER WARRANTIES OF MARCH. WHETHER WRITTEN, ORAL OR IMPLIED, AND MARCH HEREBY DISCLAIMS ANY OTHER REPRESENTATION OR WARRANTY EITHER EXPRESSED OR IMPLIED AS TO ANY MATTER WHATSOEVER, INCLUDING WITHOUT LIMITATION THE DESIGN OF THE PUMP. ITS MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE AND ITS CONFORMITY TO THE PROVISIONS AND SPECIFICATIONS OF ANY PURCHASE ORDER, ORDER OR OTHER DOCUMENT OR STATEMENT RELATING THERETO. IN NO EVENT SHALL MARCH BE LIABLE FOR LIQUIDATED, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING STRICT LIABILITY IN TORT, LOSS OF PRODUCTION OR DELAYS IN CONSTRUCTION).
The user must exercise primary responsibility in selecting the product's materials of construction, which are compatible with the liquid/s that come in contact with the product. The user may consult March Manufacturing or a distributor to seek a recommendation of the product's materials of construction that the offers the optimum available chemical compatibility. However neither March or the distributor shall be liable for product damage or failure, injuries, or any other damage or loss arising out of a reaction, interaction or any chemical effect that occurs between the materials of the product's construction and the liquids that come into contact the product.