Simplicity, versatility and reliability have always been the hallmark of
the MARCH pump line. This is no more true than with the Series 3 pumps.
Simplicity is highlighted by the "orbital' magnetic drive, leak proof design.
Versatility is emphasized by the wide variety of uses: photographic processing,
marine air conditioning, ice machines, etc. Reliability of the Series 3 is
unsurpassed.
Varied materials of construction and motor types, as noted in the options
and specifications that follow, can insure that the Series 3 pumps can be
made compatible with almost any solution.
As with all the pumps in the MARCH line, the Series 3 are incredible products
with credible quality.
| 3CP-MD | Blue epoxy encapsulated (submerge only) |
| LC-3CP-MD | Maroon epoxy encapsulated (open-air or submerge) with bare magnet. |
| AC-3C-MD | Air cooled with bare magnet. |
| BC-3C-MD | Blast cooled with encapsulated magnet. |
Flow rates range from 0 to 10 GPM maximum. Feet of head range from 0' to
20.5' maximum.
3/4" FPT X ½" MPT outlet.
3/4" smooth inlet X 3/4" smooth outlet.
The epoxy encapsulated #3 pump has a 1/20 HP, 3200 rpm, 115 Volt motor.
The AC model has a 1/15 HP, 3200 rpm, 115 Volt, ball bearing motor.
The BC motor is a 1/15 HP, 3450 rpm, 115 Volt, ball bearing motor.
Air motors are available for the #3 pump. By suffix AM.
Polypropylene, Delrin®, 316 stainless steel, Buna N, ceramic, Viton®,
bronze (on submerged models).
Film processors, ice makers, medical equipment, and marine air conditioning.
