|Max Flow||68 GPM||257 LPM|
|Max Head||65 FT||19.8 M|
|Power||5 HP||3.72 KW|
- Wet End: Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)
- Max Internal Pressure: 60 PSI / 4.1 bar
- Max Liquid Temperature: 190 °F / 87°C
- Note: Product image may be different than actual product received.
Pump Curves & General Installation Sheets
|P/N||Pump Description||Modified With|
|4||0156-0034-1000||1||0.157” CS x 6.457” ID “O” Ring (EPDM)|
|5||0156-0037-1000||2||Front & Rear Thrust Washer (Silicon Carbide)|
|6||0156-0036-1000||1||Shaft (Silicon Carbide)|
|6||0156-0043-1000||1||Shaft, 3 Flats (Ceramic)|
|7||0156-0064-0300||1||Impeller with Mica Teflon Bushings (Polypropylene)|
|7||0156-0064-0500||1||Impeller with Ryton Bushings (Polypropylene)|
|7||1||Impeller with Silicon Carbide Bushings (Polypropylene)|
|10||0156-0041-1000||1||Motor Bracket (Plastic)|
|0750-1011-1000||1||Stainless Steel Tag w/Customer's Desired Information (Not Shown)|
|Epoxy Protective Finish For Drive Magnet|
|Available Tests||Hydraulic, Hydrostatic, and or Mechanical|
5HP/3.72kW, 62 PSI and 130 CFM, 1/2″BSP Air Connection
Perfect for Applications Including
Applications for the TE-7.5P-MD-AM Magnetic Drive Pump include chemical recirculation, chemical transfer, bicarbonate systems, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, ion exchange recovery, and aquariums.
Great for Chemicals Including
The TE-7.5P-MD-AM has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-7.5P-MD-AM may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water. Please contact March Pump to review your application before using the TE-7.5P-MD-AM. Chemical Resistance Chart
March Pump’s industrial TE-7.5P-MD-AM is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 68 gallons per minute at 20 feet, and its maximum head is 65 Feet (28PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Carbon, and Ceramic. The inlet connection is 2 inch male pipe thread, and the outlet is 1.5 inch male pipe thread. The standard motor is a Compressed Air Motor which may require 62 PSI and 130 CFM. The maximum internal pressure the pump can tolerate is 60 PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-7.5P-MD-AM centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-7.5P-MD-AM is suitable for your application, please contact March Pump.
Request Additional Product Info
Information on this website may contain technical inaccuracies or typographical errors. Information may be changed or updated without notice. March may also make improvements and/or changes in the products described in this information at any time without notice.
Warranty: March Manufacturing Inc. Warranty and Warranty Registration
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov