MDX-MT3-AM Magnetic Drive Pump
March Pump’s industrial MDX-MT3-AM is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 9 gallons per minute at 1 foot, and its maximum head is 28 Feet (12PSI).
|Max Flow||9 GPM||34 LPM|
|Max Head||28 FT||8.8 M|
|Power||0.125 HP||0.093 KW|
- Wet End: Ryton (Front and Rear Housing, Impeller), Ceramic (Shaft, Thrust Washer), Viton (O-Ring)
- Max Internal Pressure: 75 PSI / 5.2 bar
- Max Liquid Temperature: 200 °F / 93 °C
- Note: Product image may be different than actual product received.
Pump Curves & General Installation Sheets
|P/N||Pump Description||Modified With|
|0135-0036-0200||1||MDX-MT3-AM Complete Standard Pump|
|1||0135-0181-1000||6||#10-32 x 1-1/8" Lg. Screw (Stainless)|
|3||0135-0088-1000||1||Front Housing with 1/2" MPT Inlet & Outlet (Ryton)|
|4||0135-0046-1000||1||1/16" CS x 2-7/8" OD "O" Ring (Viton)|
|5||0130-0028-1000||1||Thrust Washer (Ceramic)|
|8||0135-0087-1000||1||Rear Housing (Ryton)|
|9||0130-0043-0300||1||0.375" Bore Drive Magnet|
|10||0135-0135-0000||1||Motor Bracket (Plastic)|
|12||0858-0003-1000||4||#8 Split Lock Washer|
|14||0210-0038-1000||2||#8-32 Set Screw|
|17||0115-0023-1000||4||#8-32 x 1-1/8" Long Screw|
|3||0135-0128-1000||1||Front Housing with 1/2" MPT Inlet & Outlet (Polypropylene)|
|4||0135-0122-1000||1||1/16” CS x 2-7/8” OD “O” Ring (Teflon)|
|4||0750-0150-1000||1||1/16” CS x 2-7/8” OD “O” Ring (EPDM)|
|8||0135-0127-1000||1||Rear Housing (Polypropylene)|
|0750-1011-1000||1||Stainless Steel Tag w/Customer's Desired Information (Not Shown)|
|Epoxy Protective Finish For Drive Magnet|
|Available Tests||Hydraulic, Hydrostatic, and or Mechanical|
0.125HP/0.093kW, 21PSI and 3CFM, 1/8″NPT Air Connection
Perfect for Applications Including
Applications for the MDX-MT3-AM Magnetic Drive Pump include etching equipment, photographic processing equipment, ice flakers, plate processors, and marine air conditioning.
Great for Chemicals Including
The MDX-MT3-AM has pumped Acetic Acid, Acetone, Benzene Sulfonic Acid, Citric Acid, Ethanolamine, Freon 11, Potassium Hydroxide, Potassium Permanganate, Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, DI Water, and many more chemicals. The MDX-MT3-AM may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water. Please contact March Pump to review your application before using the MDX-MT3-AM. Chemical Resistance Chart
March Pump’s industrial MDX-MT3-AM is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 9 gallons per minute at 1 foot, and its maximum head is 28 Feet (12PSI). The standard wet end (the materials that come into contact with the solution) is composed of Ryton, Viton, and Ceramic. The inlet connection is 1/2 inch male pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a 0.125 Horsepower Compressed Air Motor which requires 21PSI. The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 200 Fahrenheit or 93 Celsius. The March MDX-MT3-AM centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March MDX-MT3-AM is suitable for your application, please contact March Pump.
Request Additional Product Info
Information on this website may contain technical inaccuracies or typographical errors. Information may be changed or updated without notice. March may also make improvements and/or changes in the products described in this information at any time without notice.
Warranty: March Manufacturing Inc. Warranty and Warranty Registration
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov