809-PL-HS-C 24V Brushless Mag Drive Pump
March Pump’s industrial 809-PL-HS-C 24V Brushless is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 7.5 gallons per minute at 2 feet, and its maximum head is 25 Feet (10.8PSI).
|Max Flow||7.5 GPM||28.3 LPM|
|Max Head||25 FT||7.6 M|
|Power||0.04 HP||0.029 KW|
- Wet End: Polysulfone (Front Housing), Stainless Steel (Rear Housing, Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
- Max Internal Pressure: 50 PSI / 3.4 bar
- Max Liquid Temperature: 250 °F / 121 °C
- Note: Product image may be different than actual product received.
Pump Curves & General Installation Sheets
|P/N||Pump Description||Modified With|
|0809-0180-0600||809-PL-HS-C Brushless 24V||Standard|
|0809-0180-0600||1||809-PL-HS-C 24V DC Complete Standard Pump|
|1||0923-0003-1000||4||#8-32 x 1" Long Housing Screw (Steel)|
|2||0809-0179-0100||1||Pump Housing with Center Inlet (Polysulfone)|
|3||0809-0027-1000||1||1/16" CS x 2-3/8" ID "O" Ring (Silicone)|
|4||0809-0043-1000||1||Thrust Washer (Teflon)|
|5||0809-0161-1000||1||"D" Flat Shaft (Stainless)|
|6||0809-0005-0200||1||1-11/16" Diameter Impeller (Ryton/Teflon/Glass)|
|7||0809-0012-1000||1||Rear Housing (Stainless)|
|8||0135-0040-1000||4||#8-32 x 3/8" Long Rear Housing Screw (Stainless)|
|9||0125-0083-0200||1||Drive Magnet with 6mm Bore|
|10||0210-0036-1000||4||#8-32 x 3/4" Long Screw (Stainless)|
|11||0620-0010-1000||4||#8 Lock Washer (Stainless)|
|12||0809-0058-1000||1||Motor Bracket (Plastic)|
|14||0125-0128-1100||1||Motor, 24V DC Brushless, 3650 RPM|
|0750-1011-1000||1||Stainless Steel Tag w/Customer's Desired Information (Not Shown)|
24V, 2.1 AMPS, 3650 RPM, 0.04HP / 0.03kW
Voltage Range 14-30V
Perfect for Applications Including
Applications for the 809-PL-HS-C 24V Brushless Magnetic Drive Pump include hot water systems, solar heating, and fryers.
Great for Chemicals Including
The 809-PL-HS-C 24V Brushless has pumped Cutting Oils, Ethylene Glycol, Hot Water, Hot Wort and Salt Water. The 809-PL-HS-C 24V Brushless may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water. Please contact March Pump to review your application before using the 809-PL-HS-C 24V Brushless. Chemical Resistance Chart
March Pump’s industrial 809-PL-HS-C 24V Brushless is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 7.5 gallons per minute at 2 feet, and its maximum head is 25 Feet (10.8PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polysulfone, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.375 inch female pipe thread and 0.75 inch male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 0.04 Horsepower DC 24V Brushless Motor. The 24 Volt motor has an operating range from 14 to 30 Volts. The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. To determine if the March 809-PL-HS-C 24V Brushless is suitable for your application, please contact March Pump.
Request Additional Product Info
Information on this website may contain technical inaccuracies or typographical errors. Information may be changed or updated without notice. March may also make improvements and/or changes in the products described in this information at any time without notice.
Warranty: March Manufacturing Inc. Warranty and Warranty Registration
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov