TE-5K-MD 1 Phase Magnetic Drive Pump
| Max Flow | 18 GPM | 60.5 LPM |
|---|---|---|
| Max Head | 29 FT | 6.3 M |
| Power | .2 HP | .149 KW |
| Electrical | 1PH 115/230V 50/60HZ | |
| Submersible | Non-Submersible | |
| 60HZ | 50HZ | |
| Inlet | 1"FPT |
|---|---|
| Outlet | 1/2"MPT |
| Wet End | Carbon Filled Kynar (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers) |
| Motor Options | Available in Explosion Proof |
| Available with 750 Priming Chamber |
TE-5K-MD Special Impeller for 50HZ Only Curve
Options:
O-Ring: Buna N, Viton, Teflon Encapsulated Viton, or Ethylene Propylene
Shaft: Ceramic or 316 Stainless Steel
Imp. Bushing: Carbon or Mica Teflon
The front housing, rear housing, and impeller are available in Natural Kynar.
750 Priming Chamber Information
Dimensional Drawing TE-5K-MD 1 Phase
Dimensional Drawing TE-5K-MD 1 Phase DWG (143 KB)
March Pump's industrial TE-5K-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 17 gallons per minute at 4 feet, and its maximum head is 28 Feet (or around 12PSI). The standard wet end (the materials that come into contact with the solution) is composed of carbon filled Kynar (PVDF), Viton, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.5 male pipe thread. The standard motor is a 1 Phase 115/230V 0.2 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 200 Fahrenheit or 93 Celsius. The March TE-5K-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-5K-MD is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the TE-5K-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, small scrubbers, detergent mixers, computer cooling, carbon arc furance cooling, and marine air conditioners.
Great for Chemicals Including
The TE-5K-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide, Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-5K-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the TE-5K-MD for any of the above listed chemicals. Chemical Resistance Chart
Warranty
March pumps are guaranteed against defects in materials or workmanship for one year from the date of manufacture. Warranty will be extended for up to one year from the date of purchase, provided that the warranty card is returned to the factory within 10 days of the purchase date.
In all events, liability is limited to the purchase price and to the placement or repair of any pump or parts defective in materials or workmanship. All pumps for which a warranty claim is made must be returned to the factory with shipping costs prepaid. This warranty is void if the pump has been subjected to misuse or negligence. This warranty applies only to pumps used to pump water. For applications with all other solutions, contact the factory for verification of warranty terms before the pump is installed.
