Second in the MARCH product line, due to their capacities, are the Series
2 pumps. These pumps have undergone some rather dramatic changes since their
introduction. The original number 2 pumps were fitted with a stainless spindle,
threaded inlet and discharge ports and an air cooled motor. The pumps are
now available with a variety of options which include hose type inlet and
discharge ports, ceramic spindles and several motor types. This series also
includes two epoxy clad models: a submersible and a liquid cooled version.
The series 2 pumps are small, versatile and capable. They are used by OEM's
in applications that include marine air conditioning, photographic and graphic
arts processing equipment just to name a few.
| 2CP-MD | Blue epoxy encapsulated (sub only) - polypropylene. |
| LC-2CP-MD | LC = Liquid cooled, maroon color epoxy. |
| AC-2C-MD | AC = Air cooled 316 stainless steel spindle. |
| AC-2CP-MD | P = Porcelain ceramic spindle. |
| AC-2AP-MD | A = Smooth inlet and outlet. |
| BC-2CP-MD | BC = blast cooled motor, poly-encased impeller magnet, and ball bearing motor. |
| BC-2AP-MD |
Flow rates range from 0 to 5.5 GPM maximum.
Feet of head range from 0' to 13.5' maximum.
Offered in 3/8" FPT, 3/4" MPT, 3/4" O.D. smooth inlets. Outlets offered in
1/4" MPT end ½" O.D. smooth.
2CP-MD (blue encapsulated) and the LC-2CP-MD (maroon encapsulated epoxy)
both use a 1/35 HP, 115 Volt motor. All AC and BC motors are 1/40 HP, 3450
rpm, 115 Volt. An air motor is available. Indicated by suffix AM
Epoxy, polypropylene, ceramic, Viton®, 316 stainless steel. BC models
have polypropylene encased impeller magnet. Buna N rubber is used on most
models tor O'rings.
Etching equipment, garden fountains, ice flakers, plate processors end marine air conditioning.
