With capacities to 82 GPM and 85 feet of head, the MARCH Model TE-7.5K-MD is the only pump in the product line that is constructed of natural unfilled polyvinylidene fluoride resin (PVDF or Kynar®). This makes the TE-7.5K-MD ideal for super sensitive applications where even a trace of foreign matter is unacceptable.
Standard with the Series TE-7.5K-MD pump is a 2 HP, 3 phase, TEFC motor, natural PVDF materials, Viton® "O" rings, ceramic thrust washer and spindle; and carbon bushings Options available, include Teflon® and ethylene propylene "0" rings; and mica filled Teflon® bushings.
Explosion proof and severe duty motors are available on special order.
The TE-7.5K-MD pump is being used in a wide variety of applications such
as electronics manufacturing and plating. Where purity of solutions is critical,
the TE-7.5K-MD is an excellent choice.
| TE-7.5K-MD | K = Natural PVDF (Kynar®) |
Flow rates range from 10 GPM minimum to 82 GPM maximum. Feet of head range
from 0' to 85' maximum.
2" MPT inlet X 1 ½" MPT outlet.
A 2 HP, 3450 rpm, 230/460 Volt, 3 phase, 50/60 Hz, TEFC motor with conduit box.
Explosion Proof motor available.
Natural unfilled polyvinylidene fluoride resin (PVDF), ceramic, Viton®,
carbon bushing. (2 piece).
This pump is ideal for super sensitive applications such as microchips manufacturing, where ultra pure liquid is required. Plating equipment, D.I. water systems. On high purity applications use mild filled Teflon® bushings.
