Small but versatile is the most adequate description for the Series 1 pump.
The pumps are small in physical size and can deliver a minimum of 1.7 GPM
and can develop head pressures up to 2.0 PSI or 4.6 feet of head.
The Series 1 pumps are available in both open air and epoxy clad, submersible
models with a myriad of options in both materials of construction and inlet
and discharge ports. The versatility of the Series 1 pump is wide as is indicated
by the general specifications that follow.
| AC- 1A-MD | AC-1C-MD | 1A-MD 3/8 | ||
| 1A-MD 1/2 | 1C-MD | 1U-MD |
Note: AC = Air Cooled motor: If AC doesn't precede the model number, then
the motor is epoxy encapsulated for open air submersible duty and is maroon
color.
The series #1 pump with 1/2" O.D. or 1/4" MPT inlet and outlet will flow
3.0 GPM maximum. @ zero head ft. Series #1 pump with 3/8" O.D. inlet and
outlet will flow 1.7 GPM maximum. @ zero head ft. All series #1 pumps are
capable of producing a maximum head ft. of 4.5 @ zero GPM.
Series #1 pumps are supplied in 1/4" MPT, 3/8" O.D., 1/2" O.D. and a screen.
A bulkhead style inlet is available on request.
Series #1 pumps use 1/200 HP, 3200 rpm, 115 Volt or 230 volt single phase,
50/60 Hz., Air Cooled or encapsulated motors.
polypropylene, nylon, Buna N, 316 stainless steel, ceramic magnet, chemloy
washer.
Photographic equipment, refrigeration systems, and water displays or fountains. 130 F or less.
