March Chemical Pumps for Nitric Acid

Seeking a pump for the chemical Nitric Acid, March Pumps has many choices!  From 5 GPM to 200 GPM, March Pumps has a pump for Nitric Acid for any application. 

If pumping the chemical Nitric Acid at room temperature, it is recommended to go with a centrifugal sealless magnetic drive chemical pump made up of Polypropylene or Kynar Plastic or Stainless Steel, Teflon O-Ring, Encapsulated Impeller, and Mica Teflon Bushing.

The chemical Nitric Acid can also be heavy depending on the concentration and temperature.  If the specific gravity is more than 1.1, a trimmed impeller is absolutely necessary to prevent decoupling or overloading the motor. 

The following chemical pumps are a good place to start looking at when pumping the chemical Nitric Acid:

TE-5C-MD with special Teflon O-Ring and possible trim for chemical Nitric Acid

TE-5K-MD with special Teflon O-Ring and possible trim for chemical Nitric Acid

TE-5S-MD with special Teflon O-Ring, special Mica Teflon Bushing, and possible trim for Nitric Acid

TE-5.5C-MD with special Teflon O-Ring and possible trim for chemical Nitric Acid

TE-5.5K-MD with special Teflon O-Ring and possible trim for chemical Nitric Acid

TE-5.5S-MD with special Teflon O-Ring, special Mica Teflon Bushing, and possible trim for Nitric Acid

TE-6T-MD with special Teflon O-Ring, special Mica Teflon Bushing, and possible trim for chemical Nitric Acid

TE-6K-MD with special Teflon O-Ring, special Mica Teflon Bushing, and possible trim for chemical Nitric Acid

TE-7R-MD with special Teflon O-Ring, special Mica Teflon Bushing and possible trim for chemical Nitric Acid

TE-7K-MD with special Teflon O-Ring, special Mica Teflon Bushing, and possible trim for chemical Nitric Acid

TE-7S-MD special Teflon O-Ring, special Mica Teflon Bushing, and possible trim for Nitric Acid

TE-7.5P-MD with special Teflon O-Ring, special Mica Teflon Bushing, and possible trim for chemical Nitric Acid

TE-7.5K-MD with special Teflon O-Ring, special Mica Teflon Bushing, and possible trim for chemical Nitric Acid

TE-8C-MD with special Teflon O-Ring, special Mica Teflon Bushing, and possible trim for Nitric Acid

TE-8K-MD with special Teflon O-Ring, special Mica Teflon Bushing, and possible trim for chemical Nitric Acid

TE-8S-MD with special Teflon O-Ring, special Mica Teflon Bushing, and possible trim for Nitric Acid

TE-10K-MD with special Teflon O-Ring, special Mica Teflon Bushing, and possible trim for Nitric Acid

Higher concentrations and higher temperatures of the chemical Nitric Acid, together or by themselves, may make the pumps listed above unsuitable.  It is highly recommended, regardless of the temperature or concentration, that you contact a local distributor or March Manufacturing direct to review your application before ordering a pump.     

Listing of March Pump Nitric Acid Distributors


Warranty

March pumps are guaranteed against defects in materials or workmanship for one year from the date of manufacture.  Warranty will be extended for up to one year from the date of purchase, provided that the warranty card is returned to the factory within 10 days of the purchase date.

In all events, liability is limited to the purchase price and to the replacement or repair of any pump or parts defective in materials or workmanship. All pumps for which a warranty claim is made must be returned to the factory with shipping costs prepaid. This warranty is void if the pump has been subjected to misuse or negligence. This warranty applies only to pumps used to pump water.  For applications with all other solutions, contact the factory for verification of warranty terms before the pump is installed.



 

Search Our Pumps Distributor Map