March Chemical Pumps for Fluosilicic Acid

Seeking a pump for the chemical Fluosilicic Acid, March Pumps has many choices!  From 5 GPM to 200 GPM, March Pumps has a pump for Fluosilicic Acid for any application. 

If pumping the chemical Fluosilicic Acid at room temperature, it is recommended to go with a centrifugal sealless magnetic drive chemical pump made up of Polypropylene or Ryton Plastic, Buna N or Viton O-Ring, Encapsulated Impeller, and Carbon or Ryton/Teflon/Carbon Combination Bushing.

The chemical Fluosilicic Acid can also be heavy depending on the concentration and temperature.  If the specific gravity is more than 1.1, a trimmed impeller is absolutely necessary to prevent decoupling or overloading the motor. 

The following chemical pumps are a good place to start looking at when pumping the chemical Fluosilicic Acid :

BC-2CP-MD with possible trim for the chemical Fluosilicic Acid

BC-3CP-MD with possible trim for the chemical Fluosilicic Acid

BC-4C-MD with possible trim for the chemical Fluosilicic Acid

TE-5C-MD with possible trim for the chemical Fluosilicic Acid

TE-5.5C-MD with possible trim for the chemical Fluosilicic Acid

TE-6T-MD with possible trim for the chemical Fluosilicic Acid

TE-7R-MD with possible trim for the chemical Fluosilicic Acid

TE-7.5P-MD with possible trim for the chemical Fluosilicic Acid

TE-8C-MD with possible trim for the chemical Fluosilicic Acid

320-CP-MD with possible trim for the chemical Fluosilicic Acid

Higher concentrations and higher temperatures of the chemical Fluosilicic Acid, together or by themselves, may make the pumps listed above unsuitable.  It is highly recommended, regardless of the temperature or concentration, that you contact a local distributor or March Manufacturing direct to review your application before ordering a pump.   

Listing of March Pump Fluosilicic Acid Distributors

Warranty 


            

Search Our Pumps Distributor Map