March Chemical Pumps for Ferric Chloride

Seeking a pump for the chemical Ferric Chloride, March Pumps has many choices!  From 5 GPM to 200 GPM, March Pumps has a pump for Citric Acid for any application. 

If pumping the chemical Ferric Chloride at room temperature, it is recommended to go with a centrifugal sealless magnetic drive chemical pump made up of Polypropylene or Kynar Plastic and Encapsulated Impeller.

The chemical Ferric Chloride can also be heavy depending on the concentration and temperature.  If the specific gravity is more than 1.1, a trimmed impeller is absolutely necessary to prevent decoupling or overloading the motor. 

The following chemical pumps are a good place to start looking at when pumping the chemical Ferric Chloride:

BC-2CP-MD with possible trim for the chemical Ferric Chloride

BC-2CP-MD Brushless DC with possible trim for the chemical Ferric Chloride

BC-3CP-MD with possible trim for the chemical Ferric Chloride

BC-4C-MD with possible trim for the chemical Ferric Chloride

TE-5C-MD with possible trim for the chemical Ferric Chloride

TE-5.5C-MD with possible trim for the chemical Ferric Chloride

TE-6T-MD with possible trim for the chemical Ferric Chloride

TE-7R-MD with possible trim for the chemical Ferric Chloride

TE-7.5K-MD with possible trim for the chemical Ferric Chloride

TE-8C-MD with possible trim for the chemical Ferric Chloride

TE-10K-MD with possible trim for the chemical Ferric Chloride

320-CP-MD with possible trim for the chemical Ferric Chloride

335-CP-MD with possible trim for the chemical Ferric Chloride

Higher concentrations and higher temperatures of the chemical Ferric Chloride together or by themselves, may make the pumps listed above unsuitable.  It is highly recommended, regardless of the temperature or concentration, that you contact a local distributor or March Manufacturing direct to review your application before ordering a pump.  

Listing of March Pump Ferric Chloride Distributors  

Warranty 

           
Search Our Pumps Distributor Map