TE-MDK-MT3 Mag Drive Pump
|Max Flow||10 GPM||37.9 LPM||9.2 GPM||35 LPM|
|Max Head||17 FT||5.1 M||12.1 FT||3.7 M|
|Power||.066 HP||.05 KW||.066 HP||.05 KW|
|Electrical||1Ph 115/230V 50/60HZ|
|Type||Centrifugal Mag Drive|
|Wet End||Carbon filled Kynar (Front and Rear Housing, Impeller), Ceramic (Shaft, Thrust Washer), Viton (O-Ring)|
|Motor Options||Available in Explosion Proof|
|Note||Product image may be different than actual product received.|
O-Ring: Viton, Teflon, or Ethylene Propylene
The front housing, rear housing, and impeller are available in Polypropylene.
For Explosion Proof Drawing, please contact March.
March Pump's industrial TE-MDK-MT3 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 10 gallons per minute at 1 foot, and its maximum head is 17 Feet (or around 7PSI). The standard wet end (the materials that come into contact with the solution) is composed of carbon filled Kynar (PVDF), Viton, and Ceramic. The inlet connection is 1/2 inch male pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 200 Fahrenheit or 93 Celsius. The March TE-MDK-MT3 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-MDK-MT3 is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the TE-MDK-MT3 Magnetic Drive Pump include etching equipment, photographic processing equipment, ice flakers, plate processors, and marine air conditioning.
Great for Chemicals Including
The TE-MDK-MT3 has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide, Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-MDK-MT3 may have been modified to handle these chemicals. Please contact March Pump to review your application before using the TE-MDK-MT3 for any of the above listed chemicals. Chemical Resistance Chart
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov