MDXT-3 Mag Drive Pump

March Pumpís MDXT-3 centrifugal sealless magnetic drive pumps ideal for oem applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 8.5 GPM 32.2 LPM 7.9 GPM 30 LPM
Max Head 19 FT 5.8 M 13.1 FT 4 M
Power .04 HP .029 KW .04 HP .029 KW
Electrical 115V 50/60HZ or 230V 50/60HZ

Type Centrifugal Mag Drive
Inlet 1/2"FPT
Outlet 3/8"FPT
Wet End Polypropylene (Front and Rear Housing, Impeller), Ceramic (Shaft, Thrust Washer), Buna N (O-Ring), Ceramic Magnet
P/N 0135-0174-0300 (115V)
P/N 0135-0174-0400 (230V)
Note Product image may be different than actual product received.

Request Additional Product Info

March MDXT-3 Curve

MDXT-3 Pump Manual


Encapsulated Impeller 

O-Ring: Buna N, Viton, or Teflon

Reference Information

Dimensional Drawing MDXT-3 115V

Dimensional Drawing MDXT-3 230V

March Pump's industrial MDXT-3 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 8.5 gallons per minute at 4 feet, and its maximum head is 19 Feet (or around 8PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Ceramic, and Ceramic Magnet. The inlet connection is 1/2 inch female pipe thread, and the outlet is 3/8 inch female pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March MDXT-3 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March MDXT-3 is suitable for your application, please contact March Pump. 

Perfect for Applications Including 

Applications for the MDXT-3 Magnetic Drive Pump include etching equipment, photographic processing equipment, ice flakers, plate processors, and marine air conditioning.

Great for Chemicals Including

The MDXT-3 has pumped has pumped Acetic Acid, Acetone, Ammonium Sulfate, Citric Acid, Ethylene Glycol, Ferric Sulfate, Hydrogen Peroxide, Potassium Hydroxide, Sodium Chloride, Fresh Water, Salt Water, and many more chemicals.  The MDXT-3 may have been modified to handle these chemicals.  Please contact March Pump to review your application before using the MDXT-3 for any of the above listed chemicals.   Chemical Resistance Chart   


March Manufacturing Inc. Warranty and Warranty Registration

WARNING:  Cancer and Reproductive Harm- 

Search Our Pumps Distributor Map