MDX-MT3-AM Mag Drive Pump
|Max Flow||9 GPM||34 LPM|
|Max Head||28 FT||8.8 M|
|Power||.125 HP||.093 KW|
|Electrical||21PSI or 3CFM|
|Type||Centrifugal Mag Drive|
|Wet End||Ryton (Front and Rear Housing, Impeller), Ceramic (Shaft, Thrust Washer), Viton (O-Ring)|
O-Ring: Viton, Teflon, or Ethylene Propylene
The front housing, rear housing, and impeller are available in Polypropylene.
March Pump's industrial MDX-MT3-AM is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 9 gallons per minute at 1 foot, and its maximum head is 28 Feet (or around 12PSI). The standard wet end (the materials that come into contact with the solution) is composed of Ryton, Viton, and Ceramic. The inlet connection is 0.5 inch male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 0.125 Horsepower Compressed Air Motor which requires 21PSI. The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 200 Fahrenheit or 93 Celsius. The March MDX-MT3-AM centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March MDX-MT3-AM is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the MDX-MT3-AM Magnetic Drive Pump include etching equipment, photographic processing equipment, ice flakers, plate processors, and marine air conditioning.
Great for Chemicals Including
The MDX-MT3-AM has pumped Acetic Acid, Acetone, Benzene Sulfonic Acid, Citric Acid, Ethanolamine, Freon 11, Potassium Hydroxide, Potassium Permanganate, Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, DI Water, and many more chemicals. The MDX-MT3-AM may have been modified to handle these chemicals. Please contact March Pump to review your application before using the MDX-MT3-AM for any of the above listed chemicals.
Chemical Resistance Chart