TE-8S-MD Magnetically Coupled Pump

March Pumpís TE-8K-MD centrifugal sealless magnetic drive pumps constructed from 316 Stainless Steel ideal for chemical applications.
Unit System 60Hz 50Hz
Max Flow 120 GPM 400 LPM
Max Head 90 FT 19.3 M
Power 5 HP 3.7 KW
Electrical 3Ph 230/460V 50/60HZ

Type Centrifugal Mag Drive
Inlet 2"MPT
Outlet 1-1/2"MPT
Wet End 316 Stainless Steel (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers) Carbon (Bushing)
Motor Options Available in Explosion Proof

Request Additional Product Info

icon March TE-8S-MD Curve 60HZ

icon March TE-8S-MD Curve 50HZ

icon TE-8S-MD Pump Manual

Options:

O-Ring: Viton, Teflon Encapsulated Viton, or Ethylene Propylene

Front and Rear Thrust Washer: Ceramic or Hastelloy

Shaft: Ceramic or Hastelloy

Imp. Bushing: Carbon, Mica Teflon, or Ryton/Teflon/Carbon

Motor Bracket: Cast Iron or Plastic

Flanges Available

Reference Information

icon Dimensional Drawing TE-8S-MD 

icon Dimensional Drawing TE-8S-MD DWG (125 KB)

March Pump's industrial TE-8S-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems.  It is capable of generating a maximum flow of 120 gallons per minute at 20 feet, and its maximum head is 90 Feet (or around 39PSI). The standard wet end (the materials that come into contact with the solution) is composed of Stainless Steel, Viton, Carbon, and Ceramic.  The inlet connection is 2 inch male pipe thread, and the outlet is 1.5 inch male pipe thread.  The standard motor is a 3 Phase 230/460V 5 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. The March TE-8S-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.  To determine if the March TE-8S-MD is suitable for your application, please contact March Pump.

Perfect for Applications Including

Applications for the TE-8S-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, deionized water systems, scrubber systems, detergent mixers, computer cooling, waste treatment plants, and plating operations.

Great for Chemicals Including

The TE-8S-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Potassium Chloride, Potassium Hydroxide, Sodium Chloride, and Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, and many more chemicals.  The TE-8S-MD may have been modified to handle these chemicals.  Please contact March Pump to review your application before using the TE-8S-MD for any of the above listed chemicals. icon Chemical Resistance Chart

Warranty

March Pumps are warranted to the original purchaser thereof to be free of defects in workmanship and materials under normal use for a period of twelve (12) months from the date of manufacture.  This warranty will be extended to (12) months from the date of original installation if the warranty card is completely filled in and returned to March or register online at www.marchpump.com/warranty-registraton   

This warranty covers only units properly installed and maintained in accordance with March instructions.  Any March pump which the purchaser considers to be defective must be returned to the source where it was purchased.  If the pump is found by March to be defective in workmanship or materials under normal use within the warranty period March, at its option, will either replace or repair the pump.  This warranty does not cover any costs associated with the installation or removal of the pump.  If the pump was damaged in transit, you should file a claim with the carrier. 

Before using the pump, the purchaser or installer should determine the suitability of the pump for its intended use.  Purchaser assumes all risk and liability whatsoever in connection with such use or installation.   

MARCH'S SOLE LIABILITY AND THE SOLE REMEDY FOR ANY BREACH OF WARRANTY SHALL BE AS SET FORTH ABOVE.  THE WARRANTY SET FORTH ABOVE IS IN LIEU OF ALL OTHER WARRANTIES OF MARCH.  WHETHER WRITTEN, ORAL OR IMPLIED, AND MARCH HEREBY DISCLAIMS ANY OTHER REPRESENTATION OR WARRANTY EITHER EXPRESSED OR IMPLIED AS TO ANY MATTER WHATSOEVER, INCLUDING WITHOUT LIMITATION THE DESIGN OF THE PUMP.  ITS MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE AND ITS CONFORMITY TO THE PROVISIONS AND SPECIFICATIONS OF ANY PURCHASE ORDER, ORDER OR OTHER DOCUMENT OR STATEMENT RELATING THERETO.  IN NO EVENT SHALL MARCH BE LIABLE FOR LIQUIDATED, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING STRICT LIABILITY IN TORT, LOSS OF PRODUCTION OR DELAYS IN CONSTRUCTION).   

Chemical Disclaimer


The user must exercise primary responsibility in selecting the product's materials of construction, which are compatible with the liquid/s that come in contact with the product.  The user may consult March Manufacturing or a distributor to seek a recommendation of the product's materials of construction that the offers the optimum available chemical compatibility.  However neither March or the distributor shall be liable for product damage or failure, injuries, or any other damage or loss arising out of a reaction, interaction or any chemical effect that occurs between the materials of the product's construction and the liquids that come into contact the product.         

 

   
Search Our Pumps Distributor Map