SP-TE-7K-MD 1&3 Phase Mag Drive Pump
|Max Flow||53 GPM||180 LPM|
|Max Head||52 FT||11 M|
|Power||1 HP||.745 KW|
|Electrical||1Ph 115/230V or 3Ph 230/460V 50/60HZ|
|Type||Centrifugal Mag Drive|
|Wet End||Carbon Filled Kynar (Housings, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)|
O-Ring: Viton or Teflon Encapsulated Viton
Imp. Bushing: Carbon, Ceramic, Mica Teflon, or Ryton/Teflon/Carbon
3D Drawings Available in STEP Format
March Pump's industrial SP-TE-7K-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 53 Feet (or around 23PSI). When the SP-TE-7K-MD is fully primed, it is capable of having a suction life of 12 feet. The standard wet end (the materials that come into contact with the solution) is composed of carbon filled Kynar, Viton, Carbon, and Ceramic. The inlet connection is 1.5 inch female pipe thread, and the outlet is 1 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 1 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 40PSI, and the maximum liquid temperature is 180 Fahrenheit or 82 Celsius. The March SP-TE-7K-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March SP-TE-7K-MD is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the SP-TE-7K-MD Magnetic Drive Self Priming Pump include chemical recirculation, chemical transfer, and scrubber systems. They are ideal for non ported tanks and siphon feed tanks.
Great for Chemicals Including
The SP-TE-7K-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide, Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The SP-TE-7K-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the SP-TE-7K-MD for any of the above listed chemicals. Chemical Resistance Chart