TE-7.5P-MD-INT Mag Drive Pump
|Max Flow||82 GPM||310 LPM||71 GPM||268 LPM|
|Max Head||85 FT||26 M||59 FT||18 M|
|Power||2 HP||1.49 KW||1.5 HP||1.11 KW|
|Electrical||3Ph 208/230/460V 60HZ & 190/380V 50HZ|
|The TE-7.5P-MD-INT uses a Intermittent Duty Motor, which is a physically smaller motor then the standard Continuous Duty motor used on the TE-7.5P-MD.|
|Type||Centrifugal Mag Drive|
|Wet End||Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)|
|Note||Product image may be different than actual product received.|
Imp. Bushing: Carbon, Ceramic, Mica-Teflon, Ryton/Teflon/Carbon, or Silicon Carbide (2 necessary)
O-Ring: Viton or Ethylene Propylene
Shaft: Ceramic or Silicon Carbide
* For Explosion Proof Drawing, please contact March.
March Pump's industrial TE-7.5P-MD-INT is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and deionized water systems. It is capable of generating a maximum flow of 82 gallons per minute at 40 feet, and its maximum head is 85 Feet (or around 37PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Carbon, and Ceramic. The inlet connection is 2 inch male pipe thread, and the outlet is 1-1/2 inch male pipe thread. The standard motor is a 3 Phase 2 Horsepower totally enclosed fan cooled intermittent duty motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 60PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-7.5P-MD-INT centrifugal magnetic drive pump is capable of handling mildly, or highly corrosive chemicals, acids, and solvents. To determine if the March TE-7.5P-MD-INT is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the TE-7.5P-MD-INT Magnetic Drive Pump include chemical recirculation, chemical transfer, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.
Great for Chemicals Including
The TE-7.5P-MD-INT has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-7.5P-MD-INT may have been modified to handle these chemicals. Please contact March Pump to review your application before using the TE-7.5P-MD-INT for any of the above listed chemicals. Chemical Resistance Chart
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov