TE-7.5P-MD with Flanges Mag Drive Pump

March TE-7.5P-MD with Flanges
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 82 GPM 310 LPM 71 GPM 268 LPM
Max Head 85 FT 26 M 59 FT 18 M
Power 2 HP 1.49 KW 1.5 HP 1.11 KW
Electrical 1PH 115/208/230V 60HZ & 100/200V 50HZ or 3Ph 208/230/460V 60HZ & 190/380V 50HZ
On 50HZ, the Single Phase Motor is rated for 1.5 horsepower or 1.1 kilowatts.
On 50HZ, the Three Phase Motor is rated for 1.5 horsepower or 1.1 kilowatts.

Type Centrifugal Mag Drive
Inlet 2" ANSI Class 150 Flange
Outlet 1.5" ANSI Class 150 Flange
Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)
Motor Options Available in Explosion Proof and 575V Motor
P/N 0156-0059-0470 (1 Phase)
P/N 0156-0059-0170 (3 Phase)
Note Product image may be different than actual product received.

Request Additional Product Info

March TE-7.5P-MD Curve 60HZ

March TE-7.5P-MD Curve 50HZ

March TE-7.5P-MD Pump Manual

Options:

Imp. Bushing: Carbon, Ceramic, Mica-Teflon, Ryton/Teflon/Carbon, or Silicon Carbide (2 necessary)

O-Ring: Viton or Ethylene Propylene

Shaft:  Ceramic or Silicon Carbide  

Pump Base Available

Reference Information

Dimensional Drawing TE-7.5P-MD with Flanges 1PH

Dimensional Drawing TE-7.5P-MD with Flanges 3PH

* For Explosion Proof Drawing, please contact March.  

March Pump's industrial TE-7.5P-MD with Flanges is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and deionized water systems.  It is capable of generating a maximum flow of 82 gallons per minute at 40 feet, and its maximum head is 85 Feet (or around 37PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Carbon, and Ceramic.  The inlet connection is 2 inch ANSI Class 150 Flange, and the outlet is 1-1/2 inch ANSI Class 150 Flange.  There are two standard motors.  The first is a 1 Phase 60 hertz 115/208/230V and 50 hertz 100/200V 2 horsepower totally enclosed fan cooled motor.  The second is a 3 Phase 50/60 hertz 208/230/460V and 50 hertz 190/380V 2 horsepower totally enclosed fan cooled motor.  There are performance differences between the hertz options.  The maximum internal pressure the pump can tolerate is 60PSI, and the maximum liquid temperature is 150 Fahrenheit or 65 Celsius. The March TE-7.5P-MD with Flanges centrifugal magnetic drive pump is capable of handling mildly, or highly corrosive chemicals, acids, and solvents.  To determine if the March TE-7.5P-MD with Flanges is suitable for your application, please contact March Pump.   

Perfect for Applications Including

Applications for the TE-7.5P-MD with Flanges Magnetic Drive Pump include chemical recirculation, chemical transfer, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.

Great for Chemicals Including

The TE-7.5P-MD with Flanges has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.  The TE-7.5P-MD with Flanges may have been modified to handle these chemicals.  Please contact March Pump to review your application before using the TE-7.5P-MD with Flanges for any of the above listed chemicals.  Chemical Resistance Chart

Warranty 

March Manufacturing Inc. Warranty and Warranty Registration        
  

       WARNING:  Cancer and Reproductive Harm- www.P65Warnings.ca.gov              

                                  

Search Our Pumps Distributor Map