DP-6T-MD 1 Phase Mag Drive Pump
|Max Flow||38 GPM||LPM|
|Max Head||49 FT||M|
|Electrical||1PH 115/230V 60HZ|
|Type||Centrifugal Mag Drive|
|Wet End||Polypropylene (Impeller), Ryton (Front Housing, Rear Housing), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Ryton/Teflon/Carbon (Bushing)|
O-Ring: Viton, Teflon Encapsulated Viton, or Ethylene Propylene
Front Thrust Washer: Ceramic or Hastelloy
Shaft: Ceramic, Hastelloy, or 316 Stainless Steel
Imp. Bushing: Carbon, Mica Teflon, or Ryton/Teflon/Carbon
The front housing, rear housing, and impeller are available in Polypropylene.
March Pump's industrial DP-6T-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 38 gallons per minute at 10 feet, and its maximum head is 49 Feet (or around 21PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Ryton, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.75 inch male pipe thread. The standard motor is a 1Phase 115/230V 0.5 Horsepower drip poof motor, which can be run on 60 hertz. The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March DP-6T-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March DP-6T-MD is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the DP-6T-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, bicarbonate systems, deionized water systems, refrigerators, scrubber systems, detergent mixers, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.
Great for Chemicals Including
The DP-6T-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium
Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The DP-6T-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the DP-6T-MD for any of the above listed chemicals. Chemical Resistance Chart