TE-5S-MD 1 Phase Mag Drive Pump
|Max Flow||18 GPM||68.1 LPM||15.9 GPM||60 LPM|
|Max Head||29 FT||8.85 M||20.7 FT||6.3 M|
|Power||.2 HP||.149 KW||.2 HP||.149 KW|
|Electrical||1PH 115/230V 50/60HZ|
|Type||Centrifugal Mag Drive|
|Wet End||316 Stainless Steel (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)|
|Motor Options||Available in Explosion Proof|
|Available with 750 Priming Chamber|
O-Ring: Buna N, Viton, Teflon Encapsulated Viton, or Ethylene Propylene
Shaft: Ceramic or 316 Stainless Steel
Impeller: Polypropylene, Carbon Filled Kynar, Natural Kynar, Ryton, or 316 Stainless Steel
Imp. Bushing: Carbon or Mica Teflon
* For Explosion Proof Drawing, please contact March.
3D Drawings Available in STEP Format
March Pump's industrial TE-5S-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 18 gallons per minute at 7 feet, and its maximum head is 29 Feet (or around 12PSI). The standard wet end (the materials that come into contact with the solution) is composed of 316 Stainless Steel, Viton, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a 1 Phase 60 hertz 115/230V and 50 hertz 110/220V 0.2 horsepower totally enclosed fan cooled motor (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. The March TE-5S-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-5S-MD is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the TE-5S-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, small scrubbers, detergent mixers, computer cooling, carbon arc furnace cooling, and marine air conditioners.
Great for Chemicals Including
The TE-5S-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Potassium Chloride, Potassium Hydroxide, Sodium Chloride, Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, and many more chemicals. The TE-5S-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the TE-5S-MD for any of the above listed chemicals. Chemical Resistance Chart