TE-5S-MD-AM Mag Drive Pump

March Pumpís TE-5S-MD-AM centrifugal sealless magnetic drive air powered pumps constructed from 316 Stainless Steel ideal for chemical applications.
Max Flow 18 GPM 68 LPM
Max Head 50 FT 15.2 M
Power .125 HP .093 KW
Electrical 60PSI or 7CFM

Type Centrifugal Mag Drive
Inlet 1"FPT
Outlet 1/2"MPT
Wet End 316 Stainless Steel (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)

Request Additional Product Info

icon March TE-5S-MD-AM Curve

icon TE-5S-MD-AM Pump Manual

Options:

O-Ring: Buna N, Viton, Teflon Encapsulated Viton, or Ethylene Propylene

Shaft: Ceramic or 316 Stainless Steel

Impeller: Polypropylene, Carbon Filled Kynar, Natural Kynar, Ryton, or 316 Stainless Steel

Imp. Bushing: Carbon or Mica Teflon

Flanges Available

Reference Information

icon Dimensional Drawing TE-5S-MD-AM

icon Dimensional Drawing TE-5S-MD-AM DWG (107 KB)

March Pump's industrial TE-5S-MD-AM is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 18 gallons per minute at 1 foot, and its maximum head is 50 Feet (or around 21PSI). The standard wet end (the materials that come into contact with the solution) is composed of 316 Stainless Steel, Viton, Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.5 male pipe thread. The standard motor is a .125 Horsepower compressed air motor which requires 60PSI.  The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. The March TE-5S-MD-AM centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-5S-MD-AM is suitable for your application, please contact March Pump.

Perfect for Applications Including 

Applications for the TE-5S-MD-AM Magnetic Drive Pump include chemical recirculation, chemical transfer, small scrubbers, detergent mixers, and carbon arc furnace cooling. 

Great for Chemicals Including

The TE-5S-MD-AM has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Potassium Chloride, Potassium Hydroxide, Sodium Chloride, Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, and many more chemicals.  The TE-5S-MD-AM may have been modified to handle these chemicals.  Please contact March Pump to review your application before using the TE-5S-MD-AM for any of the above listed chemicals. 
Chemical Resistance Chart        
 

Warranty    

March Manufacturing Inc. Warranty and Warranty Registration                                                     

Search Our Pumps Distributor Map