TE-5K-MD-AC Mag Drive Pump
|Max Flow||17 GPM||60 LPM|
|Max Head||27 FT||6 M|
|Power||0.125 HP||0.093 KW|
|Electrical||115V 50/60HZ or 230V 50/60HZ|
|Type||Centrifugal Mag Drive|
|Wet End||Carbon Filled Kynar (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)|
|Available with 750 Priming Chamber|
O-Ring: Buna N, Viton, Teflon Encapsulated Viton, or Ethylene Propylene
Shaft: Ceramic or 316 Stainless Steel
Imp. Bushing: Carbon or Mica Teflon
* This picture does not reflect the current color of the Kynar parts. The Kynar used is black in color.
March Pump's industrial TE-5K-MD-AC is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 17 gallons per minute at 1 feet, and its maximum head is 27 Feet (or around 12PSI). The standard wet end (the materials that come into contact with the solution) is composed of carbon filled Kynar (PVDF), Viton, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.5 male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.125 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 200 Fahrenheit or 93 Celsius. The March TE-5K-MD-AC centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-5K-MD-AC is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the TE-5K-MD-AC Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, small scrubbers, detergent mixers, computer cooling, carbon arc furnace cooling, and marine air conditioners.
Great for Chemicals Including
The TE-5K-MD-AC has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide,Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-5K-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the TE-5K-MD-AC for any of the above listed chemicals. Chemical Resistance Chart