TE-5C-MD 1&3 PH Mag Drive Pump

March Pumpís TE-5C-MD centrifugal sealless magnetic drive pumps constructed from Polypropylene ideal for chemical applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 18 GPM 68.1 LPM 15.9 GPM 60.5 LPM
Max Head 29 FT 8.85 M 20.7 FT 6.3 M
Power .2 HP .149 KW .2 HP .149 KW
Electrical 1PH 115/230V 60HZ, 1PH 110/220V 50HZ or 3PH 230/460V

Type Centrifugal Mag Drive
Inlet 1"FPT
Outlet 1/2"MPT
Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)
Motor Options Available in Explosion Proof
Available with 750 Priming Chamber
P/N 0150-0214-0100 (With Weg 1 Phase Motor)
P/N 0150-0220-0100 (With IEC 3 Phase Motor)
Note Product image may be different than actual product received.

Request Additional Product Info

TE-5C-MD Curve 60HZ

TE-5C-MD Curve 50HZ

TE-5C-MD Special Impeller for 50HZ Only Curve

TE-5C-MD Pump Manual with Weg Motor


O-Ring: Buna N, Viton, Teflon Encapsulated Viton, or Ethylene Propylene

Shaft: Ceramic or 316 Stainless Steel

Imp. Bushing: Carbon or Mica Teflon

Flanges Available

750 Priming Chamber Information

Pump Base Available

Reference Information

Dimensional Drawing TE-5C-MD 1 Phase with Weg Motor

Dimensional Drawing TE-5C-MD-IEC 3 Phase

* For Explosion Proof Drawing, please contact March.  

March TE-5C-MD 3D Drawing  3D Drawings Available in STEP Format 








March Pump's industrial TE-5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 17 gallons per minute at 4 feet, and its maximum head is 29 Feet (or around 12PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 1/2 inch male pipe thread. There are two standard motors. The first is a 1 Phase 60 hertz 115/230V and 50 hertz 110/220V 0.2 horsepower totally enclosed fan cooled motor.  The second is a 3 Phase 60/50HZ 230/460V IEC totally enclosed 0.17 horsepower fan cooled motor.  There are performance differences between the hertz options.  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-5C-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-5C-MD is suitable for your application, please contact March Pump. 

Perfect for Applications Including  

Applications for the TE-5C-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, small scrubbers, detergent mixers, computer cooling, carbon arc furnace cooling, and marine air conditioners. 

Great for Chemicals Including

The TE-5C-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.  The TE-5C-MD may have been modified to handle these chemicals.  Please contact March Pump to review your application before using the TE-5C-MD for any of the above listed chemicals.  Chemical Resistance Chart 


March Manufacturing Inc. Warranty and Warranty Registration        


    WARNING:  Cancer and Reproductive Harm- www.P65Warnings.ca.gov    



Search Our Pumps Distributor Map