TE-5.5NK-MD 1&3 Phase Mag Drive Pump
|Max Flow||30 GPM||114 LPM||27 GPM||102 LPM|
|Max Head||41 FT||12.5 M||29.5 FT||9 M|
|Power||.33 HP||.25 KW||.33 HP||.25 KW|
|Electrical||1PH 115/230V or 3PH 230/460V 50/60HZ|
|Type||Centrifugal Mag Drive|
|Wet End||Natural Kynar (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)|
|Motor Options||Available in Explosion Proof|
O-Ring: Viton, Teflon encapsulated Viton, or Ethylene Propylene
Front Thrust Washer: Ceramic or Hastelloy
Shaft: Ceramic or Hastelloy
Imp. Bushing: Carbon, Ceramic, Mica Teflon, or Ryton/Teflon/Carbon
* This picture does not reflect the current color of the Natural Kynar parts. The Natural Kynar is white in color.
March Pump's industrial TE-5.5NK-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (or around 18PSI). The standard wet end (the materials that come into contact with the solution) is composed of Natural Kynar (PVDF), Viton, Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 3/4 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.33 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-5.5NK-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-5.N5K-MD is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the TE-5NK-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, small scrubbers, detergent mixers, computer cooling, circuit board and microchip manufacturing.
Great for Chemicals Including
The TE-5NK-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide, Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-5NK-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the TE-5NK-MD for any of the above listed chemicals. Chemical Resistance Chart