BC-2CP-MD Brushless Mag Drive Pump

March Pumpís BC-2CP-MD centrifugal sealless magnetic drive brushless pumps ideal for chemical applications.
Max Flow 6 GPM 22.7 LPM
Max Head 23 FT 7 M
Power .04 HP .029 KW
Electrical 12V Range 10-14 or 24V Range 20-28

Type Centrifugal Mag Drive
Inlet 3/8"FPT & 3/4"MPT
Outlet 1/4"MPT
Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washer)

Request Additional Product Info

icon March BC-2CP-MD Brushless Curve

icon BC-2CP-MD Brushless Pump Manual

Options:

Housings: Polypropylene or Delrin

O-Ring: Buna N, Viton, or Ethylene Propylene

Shaft: Ceramic or 316 Stainless Steel

Impeller: Polypropylene or Delrin

Reference Information

icon Dimensional Drawing BC-2CP-MD Brushless 12V

icon Dimensional Drawing BC-2CP-MD Brushless 24V (44 KB)

icon Dimensional Drawing BC-2CP-MD Brushless 12V DWG (150 KB)

icon Dimensional Drawing BC-2CP-MD Brushless 24V DWG (152 KB)

March Pump BC-2CP-MD Brushless 3D Drawing













3D Drawings Available In DWG, IPT, and STEP Format. 
 

March Pump's industrial BC-2CP-MD Brushless is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and solar equipment. It is capable of generating a maximum flow of 6 gallons per minute at 2 feet, and its maximum head is 23 Feet (or around 10PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, and Ceramic. The inlet connection is 0.375 female pipe thread and 0.75 male pipe thread, and the outlet is 0.25 inch male pipe thread. The standard motor is a 0.04 Horsepower DC Brushless Motor, available in 12 or 24 Volts.  The 12 Volt Motor has an operating range from 10 to 14 Volts, and the 24 Volt Motor has an operating range from 20 to 28 Volts.  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March BC-2CP-MD Brushless centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March BC-2CP-MD Brushless  is suitable for your application, please contact March Pump.

Perfect for Applications Including 

Applications for the BC-2CP-MD Brushless Mag Drive Pump includes chemical recirculation, chemical transfer, computer cooling, and x ray machine cooling. 

Great for Chemicals Including

The BC-2CP-MD Brushless has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.  The BC-2CP-MD Brushless may have been modified to handle these chemicals.  Please contact March Pump to review your application before using the BC-2CP-MD Brushless for any of the above listed chemicals. 
Chemical Resistance Chart     

Warranty

March Pumps are warranted to the original purchaser thereof to be free of defects in workmanship and materials under normal use for a period of twelve (12) months from the date of manufacture.  This warranty will be extended to (12) months from the date of original installation if the warranty card is completely filled in and returned to March or register online at www.marchpump.com/warranty-registraton   

This warranty covers only units properly installed and maintained in accordance with March instructions.  Any March pump which the purchaser considers to be defective must be returned to the source where it was purchased.  If the pump is found by March to be defective in workmanship or materials under normal use within the warranty period March, at its option, will either replace or repair the pump.  This warranty does not cover any costs associated with the installation or removal of the pump.  If the pump was damaged in transit, you should file a claim with the carrier. 

Before using the pump, the purchaser or installer should determine the suitability of the pump for its intended use.  Purchaser assumes all risk and liability whatsoever in connection with such use or installation.   

MARCH'S SOLE LIABILITY AND THE SOLE REMEDY FOR ANY BREACH OF WARRANTY SHALL BE AS SET FORTH ABOVE.  THE WARRANTY SET FORTH ABOVE IS IN LIEU OF ALL OTHER WARRANTIES OF MARCH.  WHETHER WRITTEN, ORAL OR IMPLIED, AND MARCH HEREBY DISCLAIMS ANY OTHER REPRESENTATION OR WARRANTY EITHER EXPRESSED OR IMPLIED AS TO ANY MATTER WHATSOEVER, INCLUDING WITHOUT LIMITATION THE DESIGN OF THE PUMP.  ITS MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE AND ITS CONFORMITY TO THE PROVISIONS AND SPECIFICATIONS OF ANY PURCHASE ORDER, ORDER OR OTHER DOCUMENT OR STATEMENT RELATING THERETO.  IN NO EVENT SHALL MARCH BE LIABLE FOR LIQUIDATED, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING STRICT LIABILITY IN TORT, LOSS OF PRODUCTION OR DELAYS IN CONSTRUCTION).   

Chemical Disclaimer


The user must exercise primary responsibility in selecting the product's materials of construction, which are compatible with the liquid/s that come in contact with the product.  The user may consult March Manufacturing or a distributor to seek a recommendation of the product's materials of construction that the offers the optimum available chemical compatibility.  However neither March or the distributor shall be liable for product damage or failure, injuries, or any other damage or loss arising out of a reaction, interaction or any chemical effect that occurs between the materials of the product's construction and the liquids that come into contact the product.                                                                                     

 

Search Our Pumps Distributor Map